KT03 Firmware 1.001 to 1.006

[admin]

The new release  of KT03 firmware can be downloaded from https://www.cytech.biz/kt03_firmware.html

It is essential for those who have been using evaluation KT03s to upgrade the older firmware

Known Issues

1. Read and Write EEPROM for external UCMs, eg KNX, Velbus, Universal, Zwave do not work when using KT03 USB connection as a UCM
   

[ident]

The  firmware for KT03 1.04 is on the website now
https://www.cytech.biz/kt03_firmware.html

[slychiu]

The new KT03 Firmware 1.005 is available from the website at https://www.cytech.biz/kt03_firmware.html

The changes are

1. Fixed problem where zone changes  are not updated sometimes
2. Correct Alarm Status is shown after KT03 reset
3. RIO inputs are now supported
4. Added Seup Option in Volume Setting page for Key beeps to be disabled
5. Added visual indication of pressed button to allow confirmation of button press

Known Bugs

1. When another keypad is talking, pressing a key on KT03 produces a long beep but also can hear voice from Comfort
   

This firmware should be upgraded for all KT03s

[slychiu]

KT03 Firmware 1.006 can be downloaded from the website at https://www.cytech.biz/kt03_firmware.html

Changes are

1. Keypress Beep on/off settings arer maintained when KT03 is reset
2. KT03 Announcement On/Off settings have been added in the Volume settings page. This allows announcements on KT03 to be enabled or disabled, eg Security Mode and Arming announcements. This setting is maintained when KT03 is reset
3. Screen  Timeout allow value of 0 means no time-out of the display
   
4. Portraits settings fixed Bugs
5. Fixed Bugs for missing communications from Comfort

These changes are important. The firmware of existing KT03 should be upgraded