+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: KT03 Touchscreen Keypad (OBSOLETE) (https://www.comfortforums.com/forum-90.html)
+---- Forum: KT03 Firmware History (https://www.comfortforums.com/forum-104.html)
+---- Thread: KT03 Firmware 1.001 to 1.006 (/thread-2020.html)
- admin - 10-25-2010
The new release of KT03 firmware can be downloaded from https://www.cytech.biz/kt03_firmware.html
It is essential for those who have been using evaluation KT03s to upgrade the older firmware
Known Issues
- Read and Write EEPROM for external UCMs, eg KNX, Velbus, Universal, Zwave do not work when using KT03 USB connection as a UCM
- ident - 11-09-2010
The firmware for KT03 1.04 is on the website now
https://www.cytech.biz/kt03_firmware.html
- slychiu - 12-09-2010
The new KT03 Firmware 1.005 is available from the website at https://www.cytech.biz/kt03_firmware.html
The changes are
- Fixed problem where zone changes are not updated sometimes
- Correct Alarm Status is shown after KT03 reset
- RIO inputs are now supported
- Added Seup Option in Volume Setting page for Key beeps to be disabled
- Added visual indication of pressed button to allow confirmation of button press
- When another keypad is talking, pressing a key on KT03 produces a long beep but also can hear voice from Comfort
- slychiu - 01-09-2011
KT03 Firmware 1.006 can be downloaded from the website at https://www.cytech.biz/kt03_firmware.html
Changes are
- Keypress Beep on/off settings arer maintained when KT03 is reset
- KT03 Announcement On/Off settings have been added in the Volume settings page. This allows announcements on KT03 to be enabled or disabled, eg Security Mode and Arming announcements. This setting is maintained when KT03 is reset
- Screen Timeout allow value of 0 means no time-out of the display
- Portraits settings fixed Bugs
- Fixed Bugs for missing communications from Comfort