Response for Output signal 1 min on / 1 min off

[mindi65]

Hi

[img]file:///C:/DOCUME%7E1/Marelis/LOCALS%7E1/Temp/moz-screenshot.jpg[/img]System information
Ultra Action 4.206
UCM 5.43
16out/16 inp + 2*RIO (16+16)

How to program response trigering an output for 60 sec ON and then 30 sec OFF and again 60/30/60/30 ... ?

This shall load system as less as posible.

This response (action) shall be stoped by some inputs

Regards
Mindaugas

[slychiu]

Response OPON:
Do Output1ON [Output 1 ON]
Do OPOFF [OP OFF 30 seconds] After 60 Seconds Using Timer01

Response OPOFF:
Do Output1OFF [Output 1 OFF]
Do OPON [O/P ON 60 sec] After 30 Seconds Using Timer01

Stop Timer Response:
Stop Timer Timer01

The first response will turn on O/P 1 and start a timer for 60 seconds using Timer 1
At the end of the Timer, the second Response is activated which turns off O/P 1 and starts Timer 1 for 30 seconds then back to the first response, and so on in a continuous loop

To stop this cycle call the 3rd response which stops the timer