Simple Doorbell!!

[Warby]

Hi,
I am trying to get a DM02 to act as a simple doorbell. We have removed the ringer from the main board and it works well except the client doesn\'t like the doorbell sound. So i am trying to get it to say doornbell or a reminder message instead and make no beep thru the keypads or internal speaker.
I have set the doorbell alarm type to not used and the response assigned in Misc events>Doorbell Response is

\"Stop Ringer
Announce Door Bell\"

The problem is it is still beeping thru the internal sounder using sound type Doorbell.

Any suggestions?

[slychiu]

The Doorbell siren type is applied when the doorbell is pressed regardless of the doorbell alarm settings

Go to the Doorbell siren and set a very short duration 0.05 seconds. He should not hear that

Alternatively ask your customer to whistle what he wants to hear as a doorbell chime and try to program that as a  sound type

[Warby]

at 0.5 the sounders still beep.Tried recording a reminder off the speakers on my computer that was more pleasant but the quality was terrible (as expected)

Solution- Don\'t use comfort for the doorbell, use The AV system instead!!