When I go back to the UK later in the year I'll do a few more tests and, if I don't find a solution, I'll ...   Saturday May 20th, 2023 12:47 pm

Unfortunately, I didn't have much time to look at this before I had to travel. I had already ordered a replacement board from Laser, as well ...   Friday May 19th, 2023 10:10 am

An update on this as I'm currently home in the UK. This still doesn't work using a new UCM/USB board to try to program the ...   Saturday May 6th, 2023 11:35 am

I did have the cable connected to the connectors as described. As I said, when I connected the RS485 bus, the UCM powered up as expected. ...   Tuesday Jan 3rd, 2023 02:47 pm

I'm having major issues doing a cable firmware update. I have a relatively new Comfort II Ultra system which, unfortunately, failed a firmware update ...   Tuesday Jan 3rd, 2023 12:18 pm

Using Comfigurator v 3.13.7.0 to program a recently upgraded system with a CM9001 board, which has the EOL settings programmed, rather than as hardware shunts. I ...   Sunday Mar 13th, 2022 03:05 am

Hi Chiu, Any luck? Cheers, Keith ...   Thursday Jul 19th, 2018 05:30 am

Hi all, I'm Keith and have had a Comfort System, along with other home automation, in my home since about 2000/1, which has undergone various tweaks ...   Sunday Jul 15th, 2018 01:33 pm

Hi Chiu, It's a Comfort 2 Cheers, Keith ...   Sunday Jul 15th, 2018 12:03 pm

Resurrecting this old thread, I still have one of the DP02 door stations insetinto my front wall. The DP03x doesn't seem to be available any more. ...   Saturday Jul 14th, 2018 04:27 pm

From what I see that is an integration with Smart Things which may, indirectly, provide integration with Home, Alexa, and others. That's good, I guess, but ...   Saturday Nov 11th, 2017 12:52 pm

wexfordman wrote I have recently got some hue lights, and a nest, and while all of my lights are controlled by comfort velbus, I now ...   Thursday Nov 9th, 2017 05:58 pm

I general, I think support of some sort of advanced network API is far more important than a built-in web Interface. My personal preference would be ...   Tuesday Nov 7th, 2017 08:39 pm

LightwaveRF have just released official documents on their API: https://api.lightwaverf.com/ Cheers, Keith ...   Friday Dec 16th, 2016 04:04 am

OK, thanks. It might be worth updating the application note to reflect this. Cheers, Keith ...   Thursday Feb 20th, 2014 02:54 am

The UCM/Universal to LightwaveRF can be found at http://www.comfortforums.com/forum94/3066.html I'm interfacing with a LightwaveRF WIFIlink device. In general it works,but in cases where I have a ...   Sunday Feb 16th, 2014 11:55 pm

OK, thanks for your help. I need to get an order for this lot together now. One question about the new SEM01-M2: it seems to have ...   Wednesday Oct 31st, 2012 12:09 pm

I can't see those diagrams at the moment, but cytech.biz appears to be down, so I'll have a look later. Presumably if it's the older model ...   Tuesday Oct 30th, 2012 09:55 am

Answering my own question here after a bit more exhaustive research, it looks like I need some MPU01-SEM's for the SEPs. If I get those and ...   Monday Oct 29th, 2012 05:15 pm

I have a Comfort II Ultra system which is long overdue an overhaul and upgrade. Can anyone advise me on what I need for this, ...   Monday Oct 29th, 2012 03:49 pm

Thanks. Cheers, Keith ...   Thursday May 6th, 2010 10:53 am

I read the FAQ on the 24 hr battery test and it mentions setting this in a location. I've checked the worksheet (Comfort Ultra II) for ...   Wednesday May 5th, 2010 11:23 pm

admin wrote: Set x10 enabled for slave I'm intrigued... what does this mean? Cheers, Keith ...   Monday Feb 9th, 2009 10:20 am

There is one thing which is missing from the UCM interface, which is specifically relevant to this thread: you cannot access the voicemail across it. Yes, ...   Saturday Sep 27th, 2008 12:57 pm

I would like to see this too, but not necessarily built entirely into Comfort. Two implementations spring to mind: 1. Comfort provides a special output code on ...   Saturday Sep 20th, 2008 06:12 pm

I seem to have solved my problem with the answering machine. I recently had some problems with my ADSL line which resulted in me changing the ...   Saturday Apr 14th, 2007 09:53 pm

This is the exact problem I have been having with my system, and there have been others: http://www.comfortforums.com/view_topic.php?id=399&forum_id=36 I'm based in the UK, which is supposed to ...   Monday Jan 15th, 2007 06:58 am

ident wrote: 120 lights require 120 inputs and outputs That's only true if you are controlling the lights with relays directly connected to Comfort inputs/outputs. If you are ...   Thursday Aug 31st, 2006 06:21 pm

I tweaked the response further trimming it to: Stop Timer LightFlash Limit DialOut Clear Flag CamAlwaysOn Do Heat21C After 5 Seconds Using GeneralTimer (so the CamAlwaysONn flag is ...   Wednesday Aug 30th, 2006 07:40 am

OK, I tried this but no dice. My SecurityOff response now reads: Stop Timer LightFlash Limit DialOut Do CamPersistOff Do Heat21C After 5 Seconds Using Timer14 In ...   Tuesday Aug 29th, 2006 04:20 pm

I wouldn't call it a "long" list: Stops a timer Limit dialout sets a flag (via a do) Issues 2 X10 commands (via a nested do) I'll try setting the ...   Monday Aug 28th, 2006 09:20 am

Yes it does only happen when moving to security off, and after I press the # key it eventually goes out. Cheers, Keith ...   Monday Aug 28th, 2006 06:05 am

I've had Comfort II in and running for about 6 weeks now, replacing my Comfort I system. One thing I have noticed is that the keypad ...   Saturday Aug 26th, 2006 03:27 pm