Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Comfort Firmware 7.183 to 7.187
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rating:  Rating
AuthorPost
 Posted: Friday Dec 11th, 2020 03:36 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5127
Status: 
Offline

  back to top

Known Bugs
  • Action 1 (Announce Zone Name) in Zone Off Response will skip announcing the 1st word in the zone
Bugs Fixed
  • Fixed BUG for eth03 plug in to CM9001 - UL with 2 bytes always returns the 2 same bytes
  • Event Log  fixed BUG last event 27 was 68 may  cause event log to crash from 28/6/18
  • Fix BUG for partitions arm to away sometimes dis not work
  • Fix bug from 13/6/19 Security check may use wrong partition
  • Fix bug  from 6/3/20 if log in wrong code using ext232 there is no reply LU00, comfigurator waits and times out
  • Fix Bug  Monitor Mode MO00 cannot exit from monitor mode
  • Fixed bug Monitor Mode MO00 cannot exit from monitor mode
  • Fixed Bug Action 158 clear and set counter did not work, but toggle worked
  • Fixed BUG dR report was not sent when ETH03/Wifi01 was plug in on CM9001
  • Event Log  fixed BUG last event number was wrong, may   cause event log to crash from 28/6/18
Event Log
  • Change in Event Log indexing. Reduces Wear on the EEPROM due to writing the event log pointer with every event. Also reduces time to erase the whole event log Fixed other bugs
  • Event Log  fixed BUG last event number was wrong, may   cause event log to crash from 28/6/18
  • Event Log will not announce month 0 if it is encountered
Action Codes
  • Action 162 Assign Reminder to Alarm to assign a recorded reminder message to an Alarm to replace sentence. If no the assigned Reminder number is recorded, the alarm message will be played
  • Action 163 assign reminder no to zone. if zone has reminder message, it will play the reminder message in event log,  zone announcement and security check, but zone menu will continue to play the zone words. If the Reminder is assigned to a zone, but the reminder message is not recorded, the zone words are played
  • Added Action get parameter  61 Login Partition
Partitions/Areas
  • Partitions If all keypads are in partition 0, allow parttions to be enabled.  some systems disarm by switch
  • Announce  Area/Partition  number in user menu if partitions exist
  • For partitioned system,  arm and disarm security will announce Area (Partition) Number after announcing security mode. Requires Vocab version 42
Announcements
  • Dial out announcements -   changed order for dial out alarm announcements. 1st play recorded alarm message, then alarm type, then alarm pararameter announcement
  • Vocabulary version 42 sentence 87 is Area (N)
  • Detector_announcement -  if not trouble or restore, announce reminder call detector_name so reminder can be announced  detector_announce if restore zone but no words in zone, call say_zoneNrestore. require vocab v43
  • Voice menu add 8 for zone announce Require vocab 43
  • zone restore announcement -  zone name restore instead of just Restore without zone
Environmental Monotoring System CM9001-EMS
  • EMS enable reminders for zones and alarms. disable Scheduled Remimders for EMS for play reminder action only
  • Enabled 16 Reminders  for ems
  • Allow  Ems without Incoming recorded messages,  with Reminders in Responses
  • EMS Voice menu  add 5 for  reminder messages f
  • EMS sensors fix bug sensor - setpoint comparison was unsigned, ie negative values are taken as positive.  process_sensortab fix bug counter compare with max and min setpoints was unsiged should be signed.
  • EMS sensors.mac process_sensortab limit counter setpoint to -128 to 127. fix bug counter >255 was set to 255 ie -1
  • EMS Sensor Setpoint Counter prevent max/min setpoint check from doing endless loop
  • EMS sensors - adjust_sensor limit final sensor values to -128 to + 127 after adjustment, but allow signed 16 bits intermediate. Aallowed sensor values for scaling (;1 = 0 to 99. sensor 0 to 255,   2 = multiply by scale factor. sensor -128 to + 127, 3 = divide by scale factor, sensor -32768 to 32767. allow larger range for division. final value will be -128 to + 127
Misc
  • Motion sensor Timer enabled for EMS. query d? got reply NA before
  • For wifi NTP, update time daily at 12: 05 am instead of 4 AM

Last edited on Sunday Dec 13th, 2020 05:01 am by slychiu



 Posted: Sunday Dec 13th, 2020 05:01 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5127
Status: 
Offline

  back to top

Bug in 7.183
Action 1 (Announce Zone Name) in Zone Off Response will skip announcing the 1st word in the zone



 Posted: Monday Jan 4th, 2021 04:19 am
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5127
Status: 
Offline

  back to top

Firmware 7.185 (Beta)
  • Fix bug from 25/5/20 zone restore action 1 when zone restored, 1st word in zone is skipped,
  • Fixed Bug In partitioned system, siren sounds for arming wer not  heard on the partition keypad
  • Fixed Old bug - if there is zone trouble in a partitioned system at reset, the partition keypad will show "Communications Failure"  without ID (instead of zone trouble)- Fixed Old Bug - if zone trouble is force armed when armed, after disarmed, the zone trouble is not shown until armed again or security check
  • Fixed Bug for Wifi Plug in, if if  not logged in or  does not log out,  idle timer from EEPROM expires does not reset Wifi module. so if wifi lost connection, the module is not reset
  • Fixed Old Bug Igf there s zone trouble and security is force armed, after disarming, the zone trouble is not shown anymore untill system is armed or security check
  • Fixed old bug in Partitioned system after alarm sren times out, the alarm state does not go to alert state. This caused after arm fail, not able to arm
  • Fixed old bug SMS disarm could not disarm from arm fail
Bugs
  • For Partitioned systme, when user logs in for partition >0, every minute the partition may be changed to to 0 so the user may arm or disarm to partition 0
Please download the beta firmware from http://www.cytech.biz/comfort_ultra_firmware.html

Last edited on Saturday Mar 13th, 2021 08:04 am by slychiu



 Posted: Saturday Mar 13th, 2021 08:02 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5127
Status: 
Offline

  back to top

Firmware 7.187
Bugs Fixed
  • Fixed Bug in CM9001 Main Board for virtual Input 1 to 8 did not waork correctly
  • Fixed bug for partitions – when user in partition > 0 signs in sometimes the partition getrs set to 0 at the start of each minute (by vacation mode check)



 Posted: Friday Apr 30th, 2021 05:05 pm
   PM  Quote  Reply 
5th Post
caravanboy
Member
 

Joined: Wednesday Mar 8th, 2017
Location: United Kingdom
Posts: 109
Status: 
Offline

  back to top

Is 7.187 a beta or release version? Comfigurator is only offering me 7.175 if I do a check for new firmware



 Posted: Saturday May 1st, 2021 06:26 am
   PM  Quote  Reply 
6th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5127
Status: 
Offline

  back to top

It has not gone to release yet, still continuing testing



 Posted: Tuesday May 4th, 2021 01:43 pm
   PM  Quote  Reply 
7th Post
Ian
Member
 

Joined: Saturday Aug 19th, 2006
Location: United Kingdom
Posts: 203
Status: 
Offline

  back to top

Last edited on Thursday May 6th, 2021 03:46 pm by Ian



 Current time is 01:12 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems