| Posted: Monday Jan 14th, 2019 04:53 pm |
|
1st Post |
AndreSz
Restricted
| Joined: | Monday Jan 14th, 2019 |
| Location: | |
| Posts: | 3 |
| Status: |
Offline
|
back to top
|
I am upgrading my old Comfort 1 system to Comfort 2 Ultra, but I am having problems with my existing KP01 keypad - Audio from the Keypad is distorted.
The comfort 1 had a pot to adjust the audio level, but the Comfort 2 does not.
- So is the KP01 basically not compatible ? - do I need a KP03 ?
|
| Posted: Monday Jan 14th, 2019 06:52 pm |
|
2nd Post |
Home
Comfort Distributors
| Joined: | Wednesday Jul 12th, 2006 |
| Location: | United Kingdom |
| Posts: | 789 |
| Status: |
Offline
|
back to top
|
Best to fit a new keypad
If you are brave and have time to spare then you might like to adjust various parameters listed under Comfiguraton settings - tuning parameters
There is an explanation in the engineer set up guide.....
|
| Posted: Tuesday Jan 15th, 2019 01:32 am |
|
3rd Post |
| Posted: Wednesday Jan 16th, 2019 03:26 pm |
|
4th Post |
AndreSz
Restricted
| Joined: | Monday Jan 14th, 2019 |
| Location: | |
| Posts: | 3 |
| Status: |
Offline
|
back to top
|
In a related question is the "Comfort Ultra II Slave Expansion Panel Plug-in Flash Upgrade [MPU01-SEM]" compatible with the SEM02 slave expansion panel.
The 4.95 firmware on my slave expansion panel is not talking to the comfort II ultra or the UCM/ETH03, So I assume it needs the Flash upgrade.
|
| Posted: Thursday Jan 17th, 2019 02:01 am |
|
5th Post |
slychiu
Administrator
| Joined: | Saturday Apr 29th, 2006 |
| Location: | Singapore |
| Posts: | 5573 |
| Status: |
Offline
|
back to top
|
The firmware 4.95 in the Slave is not firmware flashable. It cannot be upgraded. You will have to replace it
|
| Posted: Thursday Jan 17th, 2019 09:18 am |
|
6th Post |
AndreSz
Restricted
| Joined: | Monday Jan 14th, 2019 |
| Location: | |
| Posts: | 3 |
| Status: |
Offline
|
back to top
|
So can I use a
"Comfort Ultra II Slave Expansion Panel Plug-in Flash Upgrade [MPU01-SEM]"
to upgrade the firmware on a SEM02 slave expansion board.
|
| Posted: Thursday Jan 17th, 2019 11:24 am |
|
7th Post |
slychiu
Administrator
| Joined: | Saturday Apr 29th, 2006 |
| Location: | Singapore |
| Posts: | 5573 |
| Status: |
Offline
|
back to top
|
The slave 4.95 does not have a plug-in flash upgrade
Slave with firmware 5.XXX have sockets for plug in FlashThe only option is to replace with a new one. That model is about 20 years old
|
|
