Comfort Automation/ Security System Forums > Software Applications > Comfigurator > Comfigurator View Modes |
Comfort Automation/ Security System Forums > Software Applications > Comfigurator > Comfigurator View Modes |
| Moderated by: admin | Topic closed | |
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
slychiu Administrator 
|
Comfigurator 3.12.1 introduces several new View Modes which reveals only the features that are relevant to the application, and hides other features and settings that are not needed. This is because Comfigurator has become quite powerful and complex over the years, and may be confusing to new users. The Viewing Modes are;
 Last edited on Sunday Oct 8th, 2017 11:23 am by slychiu |
|||||||||
|
slychiu Administrator
|
Engineer Simplified Mode View Categories is shown below The Alarms Category in Engineer Simplified Mode is shown below Zones:  The Restore and Partition fields are hidden, as they are not used as often. Restore is set to On by default. Restore tells the dialler to dial out to SMS and CMS when the zone is restored after an alarm. Partition selects the zone to be one of 4 partitions in the alarm system. Partition is set to 0 by default. In order to change the Restore and Partition settings for the zone, change the View Mode to Engineer Advanced. Even though the fields are hidden in Engineer simplified and other modes, the setting or parameter can be changed in Engineer Advanced. Alarm Types   Dial Delay and Siren Delay are hidden in Engineer Simplified Alarm Types. These are rarely used, but they can be changed in Engineer Advanced Mode Phone Numbers  The fields Allow SMS Control, Allow SMS Arm, Allow SMS Disarm are hidden in Engineer Simplified mode. These parameters can be changed in Engineer Advanced Mode Last edited on Sunday Oct 8th, 2017 11:49 am by slychiu |
|||||||||
|
slychiu Administrator
|
Automation Mode View Categories is shown below Zone Types, Alarm Types, NonDetector Alarms, Phone Numbers, Status Outputs, Miscellaneous settings Siren Types, Sound Types are not shown because these screens are only applicable to Alarms Zones/Inputs  The fields; Phrase, Entry Path, Partition, EOL, Announce are hidden because they are not applicable to Logic Engine, UCM/Logic and automation only systems  Last edited on Sunday Oct 8th, 2017 12:25 pm by slychiu |
|||||||||
|
slychiu Administrator
|
EMS View is shown below Zone Types, NonDetector Alarms, Sign in Codes, Status Outputs, Miscellaneous Settings, Configuration Flags, Siren Types, Sound Types are hidden. Although these settings are applicable to the EMS system, the default settings are usually applicable. If these settings need to be changed, this can be done by changing the Viewing mode to Engineer Advanced. This this simplifies the programming interface Zones/Inputs  Zone Types  The Zone Types Parameters are the same as Engineer Advanced but default Zone Types have been redefined for Environmental Monitoring Last edited on Sunday Oct 8th, 2017 12:30 pm by slychiu |
|||||||||
|
slychiu Administrator
|
User Mode is described in this topic http://www.comfortforums.com/forum20/3718.html |
|||||||||