Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Door station Distortion
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Sunday Jan 15th, 2012 04:49 pm
   PM  Quote  Reply 
1st Post
WMADKOUR
Comfort Installers


Joined: Thursday Aug 14th, 2008
Location: Cairo, Egypt
Posts: 56
Status: 
Offline

  back to top

I got a weird problem at two sites, I connect the door station by Cat5e cable to comfort v5.212, the sound between KP & DP is great with the back cover loose, once we fix it and screw it, high Distortion generate and we can't hear any thing, we made sure that the wire is not pushing anything but still got the same result. Appreciate any suggestion

Regards



 Posted: Monday Jan 16th, 2012 08:37 am
   PM  Quote  Reply 
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

Which door station are you using DP03 or DS01 or DS02?

Make sure you use the default tuning parameters
Open a new file with default template so that the default tuning parameters are loaded If you use an older file tyhe tuning parameters may not be defaults

If you use DS01 or DS02 there are volume controls for mic and speaker and those should be adjusted lower so thereis no howling sound




 Posted: Monday Jan 16th, 2012 11:56 am
   PM  Quote  Reply 
3rd Post
WMADKOUR
Comfort Installers


Joined: Thursday Aug 14th, 2008
Location: Cairo, Egypt
Posts: 56
Status: 
Offline

  back to top

I'm using DP03, i upload tuning parameter only but with the same status,
the problem occure only when i closed the back cover of the DP03  !!!!

Last edited on Monday Jan 16th, 2012 11:57 am by WMADKOUR



 Posted: Monday Jan 16th, 2012 12:15 pm
   PM  Quote  Reply 
4th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

For DP03 you should not try to do any tuning of the internal volume control inside the DP03  or in the Comfort PCB MIC and Voice trimmers if they are prsent

If you have done so, reduce the gain until the howling disappears.


In DP03 and KP04 there are some sponge material to help in accoustic isolation
These should not be removed otherwise howling will result




 Current time is 06:59 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems