Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Door Station Phone Menu Problem
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Jun 12th, 2009 05:24 am
   PM  Quote  Reply 
1st Post
Miles
Member
 

Joined: Friday Jun 12th, 2009
Location:  
Posts: 3
Status: 
Offline

  back to top

Hi,

I've added two door stations to my Comfort system and updated Location 1674 with the value 2. This has worked and the door stations operate the ringer module and there is communication between the door stations and phone.

I then created a response number 146 with action 130,100,9,255 and entered the response 146 in location 52, using the Engineer's star menu.

The phone rings, and says "door bell, select station...", but offers no option to open the door. If i press 7 twice, it says "door open, select station 1 to 2, press hash to end". The first output on the expansion board does not energise at any time.

I'm not using Comfigurator and am programming through the keypad.

I also tried entering a response of 79 in location 1686 and similarly, did not get a voice menu option to open gate, when the door station was operated.

I've powered the system down and also tried a reset using Engineer's menu 7,4,2.

 

Thanks

Miles



 Posted: Friday Jun 12th, 2009 03:13 pm
   PM  Quote  Reply 
2nd Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

What is your Comfort model and Firnware version?
The locations you mention are for Comfort I Pro only
For other versionbs refer to the appropriate worksheet for programming by Keypad
Yo can also use Comfigurator 3 to find the location of the Open Door and Open Gate responses in the lower letf cxorner



 Posted: Friday Jun 12th, 2009 10:00 pm
   PM  Quote  Reply 
3rd Post
Miles
Member
 

Joined: Friday Jun 12th, 2009
Location:  
Posts: 3
Status: 
Offline

  back to top

Thank you for setting me straight.

I have a comfort 2 ULT v. 5.075. I'll need to do a bit more reading.

Thanks again.

Miles



 Posted: Saturday Jun 13th, 2009 02:41 am
   PM  Quote  Reply 
4th Post
ident
Administrator


Joined: Wednesday Aug 9th, 2006
Location: Singapore
Posts: 3493
Status: 
Offline

  back to top

You can download the Comfort II Ultra worksheet from here
Look for Table 30B for Locations for Event Triggered Responses

ULT 5.075 is a non-flahs firmware. You can buy a MPU01-ULT to upgrade to the latest firmware (currently 5.164) which also gives you a flashable microcontroller which can be upgraded in future using the UCM05



 Posted: Monday Jun 15th, 2009 10:22 pm
   PM  Quote  Reply 
5th Post
Miles
Member
 

Joined: Friday Jun 12th, 2009
Location:  
Posts: 3
Status: 
Offline

  back to top

Thank you very much for your help and instruction.

All working well now.

Cheers

Miles



 Current time is 06:56 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems