back to top

1. Upgrade firmware for Controller shows "Cannot Obtain Firmware Information". Workaround -  Please download firmware directly from http://www.cytech.biz/firmware.html Or downgrade to 3.13.9 at http://www.cytech.biz/download_files.php?item_id=1301
2. Upgrading KP04, KP06, IRIO, MSM, TSM by Coimfigurator will case an error "Incompatible File System" to be displayed. Revert to 3.13.9 as workaround
3. The number of IRIO Modules are not correctly detected after scan for modules for CM9001-EMS and CM9001-EMS2
   

1. For CM9001-EMS, No of slaves was limited to 5, now it can be increased to 5
2. For CM9001-EX, No of slaves was limited to 3. Now it can be increased to 5
   
3. The action Set Virtual Input On/Off could not select Virtual Inputs correctly
4. When UCM ID1 is not connected, and Comfigurator is connected to UCM > ID2,  Scan for Modules may show an extra UCM ID1 with firmware version 255.255
   

1. For the Register Monitor in Comfort Register, the right Pane Set Value box does not show the value of the register, so that if the value is constantly being updated, entering a new value will not be affected by the read values. The centre pane will show the register values that are updated constantly
2. Supports Future UCM ARM processor models
   

Last edited on Friday Jan 12th, 2024 01:51 am by slychiu