| Full Topic |
| Joined: | Saturday Apr 29th, 2006 |
| Location: | Singapore |
| Posts: | 5595 |
| Status: |
Offline
|
The Alarms Category in Engineer Simplified Mode is shown below
Zones:
The Restore and Partition fields are hidden, as they are not used as often.
Restore is set to On by default. Restore tells the dialler to dial out to SMS and CMS when the zone is restored after an alarm. Partition selects the zone to be one of 4 partitions in the alarm system. Partition is set to 0 by default.
In order to change the Restore and Partition settings for the zone, change the View Mode to Engineer Advanced. Even though the fields are hidden in Engineer simplified and other modes, the setting or parameter can be changed in Engineer Advanced.
Alarm Types
Dial Delay and Siren Delay are hidden in Engineer Simplified Alarm Types. These are rarely used, but they can be changed in Engineer Advanced Mode
Phone Numbers
The fields Allow SMS Control, Allow SMS Arm, Allow SMS Disarm are hidden in Engineer Simplified mode. These parameters can be changed in Engineer Advanced Mode
Last edited on Sunday Oct 8th, 2017 11:49 am by slychiu
| Close Window |