| PM | Quote | Reply | Full Topic |
| Joined: | Wednesday Aug 9th, 2006 |
| Location: | Singapore |
| Posts: | 3493 |
| Status: |
Offline
|
The security system can be armed to Away, Night, Day, Vacation Modes. The Security Mode is highlighted on the button in Blue, eg Security Off is the current security Mode in the screenshot above
the Keypad LEDs states can be viewed in this screen
To arm to Away Mode for example, press the Away Button
Note that the method of away arming depends on the UCM Connection, whether it is Network Remote or Local. If the connection is Remote, the system will not require the user to Exit from the premises using the Entry Door. If the security zones are closed, the system will arm to Away Mode after the Night Exit time
If the UCM connection is local, and arming to Away or VacationMode, the user must EXIT using the Entry Door zone before the system is armed (by the Final Door Arming method)
When arming to Night or Day Modes, there is no difference between Local and Remote connections - exit is not required
If there are Open zones seen during arming, they are seen on the box on the right and in the event box in RED text
the Force Arm button automatically bypasses the open zones and allows the system to be armed
To disarm, press the OFF button and enter the user code in the box
The event box will show system disarmed by which user eg User 1
Dial Test
Initiate a Dial test in the Phone Numbers Screen
select the keypad to hear the dial test
Last edited on Sunday Jul 19th, 2015 12:21 pm by
| Close Window |