View single post by ident

Posted: Saturday Feb 22nd, 2014 01:27 pm

Joined:	Wednesday Aug 9th, 2006
Location:	Singapore
Posts:	3493
Status:	Offline

"User Mode" is a major new feature in Comfigurator 3.8 and above, which is a simple user interface for Comfort similar to Wizcomfort which was a stand-alone program. Integration of User Mode with Comfigurator makes it easier to synchronise the programming software and User Interface with the firmware.
User Mode is also useful for testing the system after installation and programming

Note that User Mode requires Comfort Firmware 7.049

You can select Engineer Mode, which is what is used to program Comfort (what everyone is familiar with), or User Mode from the View Menu

The purpose of User Mode is to allow end users to perform user programming line record and hear messages, arm and disarm the security system and operate the Control menu

The features of User Mode are

See the status of Zones (Active, Inactive, Bypassed, Trouble)
Arm and Disarm the security system, see open zones, and allow Force arming
Operate the Control Menu and see the feedback
Operate the Blinds and Thermostat functions
Change Time Program times and enable or disable individual Time Programs.
Change Reminder times and Vacation Programs
Record, play, erase Voicemail, Greeting message, Reminders, Alarm Message, User Names via any keypad. This feature provides a direct shortcut to the voice menu on the keypad so it makes it easy for users to find the correct menu to perform these messages.
Do a Dial Test to dial to all the programmed phone numbers
Change User Sign in codes, phone numbers, and Number of Rings

User Mode does not allow the programming of Responses. The user can switch to Engineer Mode and do their own programming, but the new facility of automatically backing up the cclx file before write to Comfort will allow the old file to be restored from the computer

Further instructions will be provided in the next posts

Last edited on Sunday Jul 19th, 2015 12:27 pm by

Close Window