Posts: 807
Threads: 196
Joined: Jul 2006
Reputation:
0
Hi,
I was wondering whether it is possible to announce vocabulary through the speaker terminals on the main comfort panel (e.g. not just through the keypads, which can be turned down etc).
As an example, it would be very good to do this to easily distinguish between a chime for the front door and the back door.
Thanks!
Posts: 3,493
Threads: 476
Joined: Aug 2006
Reputation:
0
The speaker output is only connected to the siren sounds, and not the voice generation so Voice and announcements cannot ne heard from that
The speaker sounds cannot be disabled unlike keypads so it may be an annoyance for many customers
Posts: 807
Threads: 196
Joined: Jul 2006
Reputation:
0
Are you able to add this as a feature at some time please.
Even a tick box in the software would be good......
Posts: 3,493
Threads: 476
Joined: Aug 2006
Reputation:
0
That would require a major change in the hardware and re-layout of the pcb
and require an increase in cost, so less a significant number of users find this useful, it may not be worthwhile
Posts: 237
Threads: 41
Joined: Sep 2006
Reputation:
0
Couldn\'t this be done with a UCM & Audio submodule? - then an audio feed that duplicates the KP audio is available right? - just plug in some PC speakers, or connect to an audio input on an external amplifier, or even a PC...
P.
Posts: 6,024
Threads: 880
Joined: Apr 2006
Reputation:
3
Yes, in fact the UCM with Audio AUD01 plug in is meant to announce just like a keypad. The speaker output is connected to an amplifier
The earlier question or request was to have voice through the Speaker terminals, and this is not possible with the current design
