+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+---- Forum: Firmware Upgrading Problems (https://www.comfortforums.com/forum-111.html)
+---- Thread: Clock 1 day ahead (/thread-5619.html)
- on4cet - 03-21-2025
Hi,
I already tried to use another ntp server pool to automatically correct the time from the UCM to the Comfort system, but since months the clock goes wrong after a few days. The time is exactly correct, but the day always differs 1 day. So when we are friday, comfort is already at saturday.
I maybe could uncheck the setting to automatically correct the time from ntp servers, but that also means that clock drift etc... may encounter after some time.
Anyone experience with this odd behaviour ?
Kind Regards,
Bart
- slychiu - 03-21-2025
Have you upgraded the UCM, comfort and ETH03 firmware?
- on4cet - 03-21-2025
Yes, as far as i know they have all been updated. And to be honest, this is just something that appeared quite recently ...
- slychiu - 03-22-2025
Check your country and city settings in Sunrise/sunset times as shown
- slychiu - 03-22-2025
do you also have a GSM Module. That also sets the date and time in Properties
- on4cet - 03-24-2025
Hi Chiu,
I checked today and the coutry is on Belgium and city on Brussels. So that\'s OK. I\'m also not sure it has to do with DST, because like i said before, the time is exactly correct !! It\'s just a full day ahead of the real time. And if i reset it, after a while it goes to 1 day ahead again. I do have a gsm module, that timezone is also correct, but i have the value on 1 which sets the time from gsm module to comfort. I haven\'t had problems with that before, so if not necessary i would like to keep it like that to minimize clock drift.
By the way, i also have the odd behaviour that for whatever reason the system had to dial out, the normal telephone doesn\'t work anymore after that event. If i reset the system, it works again. Any idea ?
Kind Regards,
Bart
- slychiu - 03-25-2025
Please sSend the cclx file tosupport@cytech.biz sp we can check