+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Environmental Monitoring System (https://www.comfortforums.com/forum-139.html)
+--- Thread: SNMP for EMS (/thread-5457.html)
- slychiu - 11-24-2023
Some installations may require SNMP interface for the monitoring of the EMS Sensors and alarms.
The 3rd party SNMP to Modbus Master Interface module (HD67164-485-B2) may be used for this purpose.
This requires a UCM/Modbus-485 configured as a modbus Slave. The Modbus RTU (RS485) terminals are connected to the Modbus terminals of the SNMP to Modbus interface which acts as a Modbus Master. This has been tested in a CM9001-EMS system and works well. Let us know if any other information is required for this application.
- slychiu - 11-24-2023
To test the SNMP interface, a good tool is the iReasoning MIB Browser from http://ireasoning.com/
There is a free version as well as Pro version with all the features including SNMP v3