+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Environmental Monitoring System (https://www.comfortforums.com/forum-139.html)
+--- Thread: CM9001-EMS in a Central Kitchen (/thread-5432.html)
- slychiu - 06-03-2023
This is an example of Comfort CM9001 Environmental Monitoring System installed in a Central Kitchen. The functions are
- Monitor status on the Electrical Control Panels eg Incoming Fan On, Incoming Fan Trip, Local/Remote control, Exhaust Fan on/trip, Evaporator Temperature Trip, Man Trap, Evaporator Low Pressure
- Control the Fans - Exhaust, Incoming on all electrical Control Panels when in Auto or Remote mode
- Monitor NTC (Negative Temperature Coefficient) Sensors via IRIO to determine temperature and overtemperature
- In the event of any alarm ie Trip, high temperature, send SMS or voice call to max of 16 phone numbers
- Interface with Central Building Monitoring System (iBMS) via Modbus (UCM/Modbus)
- Each system has up to 96 inputs and outputs, Slaves are installed in different areas in the facility connected to the Main CM9001-EMS via RS485 Data cable.
- CP9001-EMS with 8 Inputs, 8 Outputs, with Metal Encolsore, backup Battery 12V 7AH
- SEP01 Slave Expansion Module with 0 Inputs, 8 Outputs, with Metal Encolsore, backup Battery 12V 7AH
- OP03B output msubmodule plug in on Slaves
- KP04AE Keypad with Display of sensors and setpoint values
- UCM/Modbus-485 Modbus Interface Modbus RTU in Slave Mode
- UCM/4G GSM Module for sending SMS and voice calls for any alarm, up to 16 phone numbers
- IRIO01 Intelligent Remote 8 I/O with ISM01 Analog/Disigtal Submodules
- NTC Temperature sensors connected to IRIO
- slychiu - 06-03-2023
photos from the site
