+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Questions on Using Comfort (https://www.comfortforums.com/forum-159.html)
+--- Thread: Night mode and vibration sensors (/thread-3225.html)
- Rob998 - 01-02-2013
Hi,
I have vibration sensors on all downstairs windows and PIRs in all rooms. If I want the vibration sensors to set the alarm off at night should I set the PIRs to alert for away mode and disabled for night mode and the vibration sensors to perimeter for away mode and immediate for night mode?
Thanks
Rob
- ident - 01-03-2013
If you want the vibration to immediately trigger an alarm in Night mode then the zone type should be Immediate in Night
If you set the PIRs to be disabled for night mode then they will not cause an alarm im Night mode
if you set the vibration to Perimeter in Away Mode and PIR to Alert then the alarm will only be triggered when the vibration is followed by the PIR
I hope this answers your question