+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Questions on Using Comfort (https://www.comfortforums.com/forum-159.html)
+--- Thread: Using RFID Tags To Arm/Disarm System (/thread-2917.html)
- BigDave61 - 06-19-2012
Firstly let me say that I have not bought the alarm system yet so I cannot \'try\' anything. I am exploring its functionality to see if it does all/most of what I want.
I want to set up an RFID reader next to a keypad so that it can be used as the means to arm/disarm the system. If I have read everything correctly this would be possible by connecting the output from the reader to an universal ucm with the software/programming on the Comfort system waiting for a response form the reader. In addition, if it is possible I would like to capture the RFID tag number and log it and possibly use it as part of an sms message to my phone. I realise that this requires a GSM ucm as well.
At this stage I have not purchased the RFID equipment and I am hoping it will be a case of just connecting an rs232 cable and setting up the software/programming side.
So, to ask the question.. can this be done.
Thanks.
- slychiu - 06-20-2012
You are correct, if the RFID reader has a RS232 or Rs485 or ethernet interface and can send the information then you can connect to the Unibversal UCM with the appropriate interface. If you find a suitable RFID device please share the information so that others can take advantage
- BigDave61 - 06-20-2012
slychiu. Many thanks for your reply. I would be happy to provide details once I have got that far. As I said I have yet to purchase the system but that day is getting even closer. Just got to get my head round a few more things I want to do with it then my wallet gets opened.
Again many thanks.
- ndh - 06-26-2012
Hi BigDave61,
I\'ve done some prox integration. See my Personal Message (PM) to you.
Nigel