I did consider updating a few weeks ago but when I read some of the firmware release notes I think there was something that mildly ...   Thursday Mar 4th, 2021 02:54 pm

Hmm. My mainboard is 7.116 and the ETH03's UCM is 7.098 Are there any known issues with differences in timeout behaviour between firmwares slychiu? Port 2 has ...   Thursday Mar 4th, 2021 12:45 pm

Hmm, well, in the last 10 mins port 2 has not timed out so far yet, which would be unusual for port 1. Maybe this is ...   Thursday Mar 4th, 2021 08:01 am

No, Comfigurator is not running. The only thing ever connecting to Comfort in my solution is Comfigurator or the MQTT Bridge. The timeout does seem ...   Thursday Mar 4th, 2021 07:40 am

slychiu - re. my timeout comments in the message above. Any thoughts on that? I've switched the MQTT bridge back to port 1 this morning ...   Wednesday Mar 3rd, 2021 11:22 am

I'm using this one that is described on another thread on this forum: https://github.com/koochyrat/comfort2 The quirk I am having is without timeouts though. When I just ...   Wednesday Mar 3rd, 2021 08:09 am

Ok, thanks for confirming. ...   Wednesday Mar 3rd, 2021 07:44 am

Hi, My ETH03 has 2 ports configured 1001 and 1002. I usually use the first one for Comfigurator and I've recently been testing a separate Comfort->MQTT Bridge ...   Tuesday Mar 2nd, 2021 09:26 pm

caravanboy wrote: Also on this topic - does anyone know how to stop it reconnecting so often? The python module stays connected to Comfort for ...   Tuesday Feb 23rd, 2021 07:41 am

Also on this topic - does anyone know how to stop it reconnecting so often? The python module stays connected to Comfort for between 2 ...   Monday Feb 22nd, 2021 03:45 pm

koochy_rat wrote: This is the mapping from Home assistant: if msgstr == "ARM_HOME": self.comfortsock.sendall(("x03m!03"+self.comfort_pincode+"r").encode()) #arm to 03 day mode elif msgstr == "ARM_NIGHT": self.comfortsock.sendall(("x03m!02"+self.comfort_pincode+"r").encode()) #arm to 02 night mode elif ...   Sunday Feb 21st, 2021 09:04 pm

Well, each of my notification emails on this thread here are in Italian and if yours are in English then that theory seems to hold... ...   Thursday Dec 24th, 2020 01:23 pm

Ahh, interesting. It was actually a notification in response to your post on other thread, Max. So, maybe the forum (incorrectly) uses the language ...   Thursday Dec 24th, 2020 12:55 pm

I received a new thread message notification email yesterday evening (first time for a while) but it was in Italian!  I've just checked my profile ...   Thursday Dec 24th, 2020 07:46 am

It was definitely a problem before 3.13.4 as I only used 3.13.3 and I lost those same responses in my config at some point. I'm ...   Friday Oct 23rd, 2020 07:38 am

Wow, I'm glad I saw this thread. I've been on 3.13.3 since early July 2020 (looking at my folder dates). Fortunately I keep backups of ...   Wednesday Oct 21st, 2020 07:52 am

Thanks. GSM4 successfully updated to beta 7.128 firmware. Basic GSM tests appear okay. Will await next full AC failure (sadly shouldn't be too long given ...   Tuesday Jan 28th, 2020 06:37 pm

I did some manual power failure tests as follows but all worked as expected: 1) Power fail on main panel - official Comfort SMS received OK, ...   Monday Jan 27th, 2020 07:36 pm

Ok, thanks, I'll download and try that over the next week or so and let you know. Before installing the new firmware, I will still ...   Tuesday Jan 21st, 2020 07:51 am

Hi Slychiu, I haven't got around to doing a controlled power failure test but I was at home today when we had a 45 min power ...   Monday Jan 20th, 2020 08:43 pm

yes, okay, good point. I just meant as an optional test (after I've checked signal levels etc) to see if that's the trigger for making ...   Wednesday Jan 8th, 2020 08:28 am

I think I did do that in the past but I will do it again. I think I only pulled power to my main panel ...   Tuesday Jan 7th, 2020 11:34 am

Hi, has there been any progress on investigations of this? I had another power failure last night and had similar problems. I did receive a call ...   Tuesday Jan 7th, 2020 08:00 am

I've looked at the signal in the past and it is always good. My Comfort system regularly SMS messages throughout the day when it ...   Monday Apr 29th, 2019 01:22 pm

Hi, yes, sorry. Below are the actual event log entries.   Please note that I later realised I had actually received two ...   Monday Apr 29th, 2019 11:56 am

Any news on a firmware update for this yet? I removed my custom AC failure messages. I had an AC power failure today but received ...   Thursday Apr 25th, 2019 07:21 pm

I have several X10 AD10 modules that I will soon be putting up for sale (UK only). Send me a private message if you're interested ...   Wednesday Jan 9th, 2019 10:35 pm

Great, I'll look forward to a firmware update some time in the future. Thanks for investigating! ...   Wednesday Jan 9th, 2019 08:23 am

Ok, I'll do that for now as a workaround but I think I only added those custom SMS messages last year when I originally had ...   Monday Jan 7th, 2019 10:13 am

Ok, I will email you my config file now. Thanks for investigating. ...   Sunday Jan 6th, 2019 07:04 pm

Hi, over the recent holiday period I had another incident related to my above issue (SMS messages not always sent during/after power failure) and this ...   Saturday Jan 5th, 2019 05:57 pm

Hi, I've used the voice dial-in to the GSM module before so it's unlikely to be a cable fault. Looks like everything returned to normal about ...   Monday Jun 4th, 2018 08:33 am

Hi, ever since I installed my UCM/GSM4(3G) module last year I've always been convinced it doesn't quite work correctly when there is an AC power failure. ...   Sunday Jun 3rd, 2018 11:32 pm

Hi, thanks as always for the speedy response. That's a good point - I hadn't considered the PIR1 being continuously triggered, I suppose that could have happened ...   Wednesday Feb 7th, 2018 02:10 pm

Hi, I use a set of responses to do an automatic Security Off in a morning (e.g. within 2 minutes of LAST activating my Upstairs ...   Wednesday Feb 7th, 2018 03:03 am

Sorry, you're going to think I'm really crazy now. Looking at my config more closely, I have a dial-delay period configured but only one of ...   Tuesday Nov 14th, 2017 05:57 pm

Usefully we accidentally triggered an intruder alarm in Night mode at the weekend and I disarmed quickly and the dial-out did NOT happen (i.e. it ...   Monday Nov 13th, 2017 02:03 pm

Ok, will try this tonight when I get home. Related to that... if the dial-delay has passed and the dial-out attempts have started (but say ...   Friday Nov 10th, 2017 02:11 pm

I have a dial-delay of 60 seconds.  I originally assumed that if an intruder alarm occurred (e.g. in Night mode) but the system was then ...   Friday Nov 10th, 2017 02:00 am

Hi, I have read other forum posts about disabling the keypad "night mode" voice so I was experimenting with that. I have a Response that (for test ...   Friday Nov 10th, 2017 01:33 am