slychiu wrote: plrease savbe and send the cclx file to support@cytech.biz so we can test Config from device in attacment. But its btcx file...  ...   Monday Feb 6th, 2017 02:45 pm

slychiu wrote: are you sure you have done a write to EEPROM after the latest change? Many people forget especially if ythey have done a few ...   Sunday Feb 5th, 2017 05:07 pm

When I use the groups from Application 136, the groups from aplication 56 is not transmitted to the knx. But groups from aplication 136 is ...   Saturday Feb 4th, 2017 11:02 am

I thought in a moent there is a problem with the application coverage. When you add the address of the Heating Application â„–136 ($ 88), addresses ...   Friday Feb 3rd, 2017 06:23 pm

In this project i tested c-bus groups from Aplications 49, 56, 139. Transfer c-bus groups from applications 49 and 139 works correctly in both directions. Transfer c-bus ...   Friday Feb 3rd, 2017 12:36 pm

http://radikal.ru]http://s11.radikal.ru/i183/1702/73/023a8c632e64.pnghttp://s11.radikal.ru/i183/1702/73/023a8c632e64.png ...   Friday Feb 3rd, 2017 12:14 pm

Problem with firmware V1_007. Data from c-bus network Lighting Apl. 56 ($38) dont't transimt to knx network. From knx to c-bus work ok. test config in attachment. Test ...   Wednesday Feb 1st, 2017 07:31 pm

which applications you have done work in this firmware? ...   Friday Jan 27th, 2017 04:09 pm

I'm sorry, but I'm not quite understand your answers.  I tested the new firmware and the main problem has been resolved, but I would like ...   Wednesday Jan 25th, 2017 10:53 am

Today I tested the firmware cbusknx1_006. In general, everything works :P. But there are a few comments: 1. Application â„–95 ($5F) are reserved for the network Dali. You can ...   Tuesday Jan 24th, 2017 04:27 pm

Excellent! I check everything on Monday and the results write. ...   Sunday Jan 22nd, 2017 03:10 pm

Thank you. Please take this matter in the near future, since I have a fixed period of time to work the change. If I do ...   Tuesday Jan 17th, 2017 04:48 pm

From knx to c-bus groups transmit normaly. link to video dont work? ...   Monday Jan 16th, 2017 04:39 pm

You write that the compiler supports custom applications. But there can be problems in the c-bus network with these groups... I tested the transfer of these groups ...   Monday Jan 16th, 2017 01:22 pm

In this case, the device does not work with all the claimed features! Application 56 "Lighting" in my project is almost entirely filled with light groups. ...   Thursday Dec 29th, 2016 10:09 pm

I test only liting aplication, i delete in config group address from another application. It worked! but how to be with other applications? ...   Monday Dec 26th, 2016 05:48 pm

D4 "RDY" (Green) - Always ON     //Indicates Power On. D5 "IN0" (Red) - Blink when send data from c-bus network     //Blinks when ...   Monday Dec 26th, 2016 05:24 pm

i test that variant, it's dont work... in attachment last tested config. ...   Saturday Dec 24th, 2016 02:15 pm

Thanks for the answer. These are two different issues. Regarding the thermostats everything is clear. The main problem is that group addresses of c-bus not transferred ...   Saturday Dec 24th, 2016 01:47 pm

On the knx module (PC01-035B) on the other side there is no element С108. Is it Ok? ...   Friday Dec 23rd, 2016 08:44 pm

I use Bus translator configurator V1.0.1.0 for testing knx commands i used ETS4 and Logic Machine 5 From web interface logic machine i set value for group ...   Friday Dec 23rd, 2016 08:33 pm