And here is my twist on all this. I set my PC to NTP time, set Comfort to be +-1 minute out from NTP time ...   Saturday May 9th, 2015 04:22 pm

Eth03 firmware is not the same as the UCM firmware, it should be 2.14 and needs to be upgraded using the CS Manager software. http://www.cytech.biz/eth03_firmware.html ...   Friday May 8th, 2015 12:31 am

Excellent, thanks. That will also indirectly solve the problem of the event log filling up with Time Update messages as Cbus is no longer ...   Sunday May 3rd, 2015 10:36 am

Thanks for acknowledging the fact that Comfort will never become a Time Master if there is another Time device on Cbus - Ever. Can we please ...   Saturday May 2nd, 2015 03:35 pm

Ok, I did some investigation on my network and found the following: 2015/05/01 11:35:45  Info     : Time Mastering start-up 2015/05/01 12:20:40  Date/Time: Received C-Bus message to set ...   Friday May 1st, 2015 08:20 pm

Cbus broadcasts a Time Update every 70 minutes in my case (I have a PAC unit). Actually it's very strange seeing that Comfort is supposed ...   Friday May 1st, 2015 08:34 am

I have a KP04 and this is how I turn the backlight On when my PIR detects movement. Call this KPon response and link it to ...   Tuesday Apr 21st, 2015 08:15 am

First I got to the Border property for one object and then I selected multiple objects using the mouse (rubberband Julian calls it). I then ...   Monday Apr 6th, 2015 07:15 am

Confirmed, I can replicate it. ...   Monday Apr 6th, 2015 07:10 am

Chiu, I tested it and it works perfectly. ...   Saturday Apr 4th, 2015 02:47 pm

I agree with Julian on the Read/Learn issue. I tested both my ZWave and Universal and they worked fine. Ingo ...   Tuesday Mar 31st, 2015 02:38 pm

In the meantime you could use a voltage divider to bring the 10V down to 3V. In a case like this you could then read ...   Friday Mar 27th, 2015 01:41 pm

I'm glad you found the problem. The 192.168.56.1 is exactly the same as my VM interface. Just check that the OS doesn't prefer that one ...   Wednesday Mar 25th, 2015 02:07 pm

Maybe a safer option is to write some sort of 'keepalive routine' that sends 0x00 every 60s so that the connection doesn't timeout. Changing the ...   Monday Mar 9th, 2015 04:50 pm

I don't know how the DM02 works but I do something similar for my garage door. I wired both the garage control and a CBus ...   Monday Mar 9th, 2015 03:12 pm

If anyone has a SCS switch connected to Comfort, and willing to help, then I need some data for my Comfort Simulator. I need a Bus ...   Friday Feb 27th, 2015 04:47 pm

Just as an added note. Connect a mains relay with NC or NO contacts to a spare input or RIO and create a Response to ...   Monday Feb 16th, 2015 01:39 pm

Correct yes but unfortunately my Primary controller doesn't do scenes (yet). ...   Thursday Feb 5th, 2015 04:26 pm

Ok, I finished some more testing and would like to add two findings that are significant things to consider: 1. When assigning a Comfort object EG. ...   Wednesday Feb 4th, 2015 06:22 pm

+1 for a MultilevelSensor Virtual node. ...   Friday Jan 30th, 2015 10:43 am

Just give me enough time, I'll find one... :-) ...   Friday Jan 30th, 2015 10:41 am

I tried something similar to Vangelis and decided not to hijack his thread. First I need to say that I bought some Zwave kit with a ...   Thursday Jan 29th, 2015 11:22 pm

Are there plans to update the discovery of this Binary Switch/Sensor so we can select either Counter or Sensor depending on the capabilities of the ...   Wednesday Jan 28th, 2015 08:07 am

I am going to jump on this bandwagon. I purchased a UCM/Z-Wave, a Remote, one Switch and a Fibaro Universal device. Has any progress been ...   Tuesday Jan 27th, 2015 10:39 pm

If you have the opportunity then switch off all your electrical equipment on your feed. Comfort and the boiler should be the only devices with ...   Monday Jan 12th, 2015 12:18 am

Check the Bus Monitor again to see if you still get any of those earlier NAK errors you posted. ...   Friday Jan 9th, 2015 11:29 pm

One leg of the RS485 touching ground somewhere? Check all the places where the RS485(KA/KB) cables route through between ALL the different modules. Check connectors ...   Tuesday Jan 6th, 2015 04:18 pm

There is a wishlist started a few years back, did any of the suggestions make it into production? http://www.comfortforums.com/forum63/1330.html ...   Tuesday Jan 6th, 2015 01:33 pm

I'll take credit any day but in this case it must go to Julian :) Ingo ...   Friday Jan 2nd, 2015 10:40 am

ComfortClient on the one port and iPhone app on the second. PS. You only need to upgrade the Eth02 to Eth03 module. ...   Friday Dec 26th, 2014 01:25 pm

As a test, I ran my network for most of the night without even one NAK. That Keypad02 of yours looks a bit suspect... Confirm ...   Monday Dec 15th, 2014 11:05 am

Sure. I meant if it is so fast that it is steady On (or 'solid' as mentioned earlier) it might indicate a flood problem. Fast blinking ...   Friday Dec 12th, 2014 04:19 pm

So just to confirm, D10 (Green LED) goes haywire when the system locks up? What is the D10 LED state like when it's in a ...   Friday Dec 12th, 2014 01:36 pm

So relays 2 and 3 work fine? Let's see if 4 works. Perhaps there is a spot of solder bridging the bus and one of ...   Wednesday Dec 10th, 2014 05:20 pm

Hmm... I was thinking maybe a marginal power connection on the boiler might be causing interference somehow but if you disconnected the relay and it ...   Wednesday Dec 10th, 2014 04:48 pm

This is indeed interesting... Have you tried to remove the heater and just put a lightbulb on there? If you disconnect the connection between the ...   Wednesday Dec 10th, 2014 03:08 pm