Hi ident Ok you were right, but now the client wants different type of alarms for two different sign-in codes. He wants that when he introduces the ...   Tuesday Oct 16th, 2012 09:55 am

Hi Ident Yes, and I understand it too. The reason why I want to execute a response, is because the cliente wants to prevent a situation ...   Friday Oct 12th, 2012 02:10 pm

Is there a way to execute a Response when a user introduces the user code? (Example: turn on an output). I've seen in Comfigurator something about ...   Friday Oct 12th, 2012 10:08 am

Hi slychiu I've alredy edited the file and it's working fine now. I didn't noticed this change before. Thanks very mutch for your attention. Avelino Canha ...   Monday Aug 27th, 2012 04:43 pm

Hi ident Still not working. I'll send the files that I used for this project. Thanks ...   Friday Aug 24th, 2012 03:52 pm

Hi ident Probably it could be the reason why its wrong. When the keypad started the with the wrong announcements i've downloaded only the .bin file ...   Friday Aug 24th, 2012 09:10 am

Hi ident Are there any news?! I need this to end up the cytech project. Thanks ...   Thursday Aug 23rd, 2012 09:44 pm

Hi ident I've realized that issue after the reply. The attachment is on the previous post, diffined as "Marta.zip". Today i've changed the keypad04 for a keypad03, ...   Tuesday Aug 21st, 2012 02:40 pm

Hi ident I've changed the EEPROM form the keypad04 and downloaded the vocab and there is still a mistake about it. I think there might be a ...   Monday Aug 20th, 2012 11:14 am

Hi ident No, this wasn't the original. The file in cause had been downloaded over a year ago and it worked fine untill now. I've downloaded today ...   Friday Aug 17th, 2012 02:53 pm

Hi ident Yes, it worked fine..those downloads worked fine.. ohh..and I forgot to say, the SMS received are ok. The alarm zones anounced are correct. The problem ...   Friday Aug 17th, 2012 08:20 am

Hi I have a cytech system installed and yesterday i was making some tests, and suddenly the words that is shown on the keypad changed and ...   Thursday Aug 16th, 2012 09:19 pm

Check I'll try and then reply. Thanks ...   Tuesday Apr 10th, 2012 01:57 pm

Hi ident I don't understand either. I've refered the manual because I've thought that the beeps could be caused by something about the communications on the KA/KB ...   Tuesday Apr 10th, 2012 01:20 pm

When I scan the modules: ...   Tuesday Apr 10th, 2012 11:09 am

Hi The message that I get is shown below. ...   Tuesday Apr 10th, 2012 11:09 am

Hi The manual that I refered was the engmanG2.pdf. There is a chapter at page 46 that mentions the beep on the keypad. It's a slow beep ...   Tuesday Apr 10th, 2012 11:06 am

Hi After arming my alarm system, it starts a beep on the keypad continuosly. It doesn't matter the type of the arming alarm (away, night or ...   Tuesday Apr 3rd, 2012 09:14 am

Yes, i've alredy tried this way. I can't use the other two ways because the UCM/Eth is not 6.xxx. I've upgraded two other UCM's (UCM/KNX and ...   Wednesday Mar 28th, 2012 02:15 pm

Hi I have a UCM/Eth and a UCM/RS232. I want to upgrade the firmeware of both UCM but I have two problems. The UCM/Eht has a 5.192 ...   Tuesday Mar 27th, 2012 11:05 pm

Hi ident I have 11.22V at the first SEM02 terminal, and 11.02V at the second SEM02. I know that it should be higer than 11.50V, that ...   Thursday Nov 24th, 2011 09:18 am

Hi, I have a cytech system, and it's always displaying low level battery. My system has: 1 Comfort Ultra II 1 Keypad wiht LCD 2 SEM02-M2 with an LEM02-M2 on ...   Monday Nov 21st, 2011 03:21 pm

Try updating the firmeware...it worked for me.. ...   Tuesday Nov 15th, 2011 02:04 pm

Hi Slychiu I've alredy solved the problem. I've just upgraded the firmeware and it's working fine now. By the way, thanks for the help. ...   Wednesday Oct 12th, 2011 01:19 pm

Hi people I've tried to disarm the alarm trough KNX as I said before but unsucessful. I'm using a telegram comming from the KNX, and it activates ...   Wednesday Oct 5th, 2011 02:06 pm

Hi Hendy I'll try it as you said, and i'll tell something later. Meanwhile, i'll show you what I've done and please tell me if you find ...   Friday Aug 19th, 2011 09:42 am

Hi Hendy I've alredy tried what you write on the post. But I think that you don't know the Zennio Z38i touch panel. This is a very ...   Friday Aug 19th, 2011 08:29 am

Hi Slychiu and TheMax74 I´m using a very basic touch panel (Zennio Z38i), and i can't introduce user code. I can only use KNX objects (1bit, ...   Thursday Aug 18th, 2011 10:52 am

Hi Cytech I've integrated a Home Automation KNX with the Cytech system. I'm trying to use it (Home Automation KNX) to arm and disarm the comfort ...   Wednesday Aug 17th, 2011 10:52 pm

Hi Cytech I'm instaling a siren on a Comfort, but the connections from the siren is similar to a movement detector, with the alimentation, the tamper ...   Wednesday Aug 17th, 2011 10:28 pm