We've had issues with VoIP providers due to the compression. For Vonage, there is an option called Bandwidth Saver in the web admin panel that ...   Thursday Jan 26th, 2017 08:24 pm

Is it possible to force a specific mode? If somebody purchased the GSM4(3G) can they make it act like a GSM4(2G)? I know of several locations ...   Monday Jan 16th, 2017 12:11 am

Swiss-Toni wrote: You dont seem to have this problem with GiffGaff payg sim cardsGiffGaff inactivity period is 6 months without topping up, making a call ...   Thursday May 19th, 2016 03:35 am

I'm getting the Date/Time Change message every hour as well on the installs we have here. They're all running the latest Comfort and ETH03 firmware. ...   Monday Sep 7th, 2015 06:27 pm

Using the output of the module to drive a mini relay with NC contacts would mean you can use the zone inputs like normal. ...   Thursday Jul 23rd, 2015 07:03 pm

slychiu wrote: I followed your instructions set up a gmail address to send emails to put aspmx.l.google.com as server port 25 user and password blank I am looking for ...   Tuesday Mar 10th, 2015 09:11 pm

There is a workaround I've used for this before. You can do unlimited emails within reason. 1. Setup a dedicated gmail account for your Comfort system. 2. ...   Tuesday Mar 10th, 2015 11:43 am

You should upgrade the UCM/ETH03 main board and the ETH03 plugin to the latest firmware as there are known issues with 7.048. See http://comfortforums.com/forum81/4010.html for ...   Thursday Feb 5th, 2015 07:59 pm

Pgordon wrote:   I think you misunderstood my point re the audio module... at this stage I'm referring to the temporary workaround of recording a reminder ...   Tuesday Jan 6th, 2015 02:05 am

Pgordon wrote: If I find a TTS voice that is similar enough to the current voice, I could record the TTS output rather than speaking ...   Sunday Jan 4th, 2015 02:06 am

wexfordman wrote: On a similar note, I definitely think any future version of the pcb should have on board Ethernet ports rather than having to ...   Friday Oct 10th, 2014 08:07 pm

The writeup is for the WiFi thermostats that aren't Heatmiser Neo since that is a different system which has a central gateway unit that connects ...   Wednesday Sep 24th, 2014 05:47 pm

carrington wrote: Hi, I would like to do this - can I just check that I should download the UDP firmware for ETH02 and apply to ETH03 and ...   Wednesday Sep 24th, 2014 04:54 pm

If you're in the UK and the UCM was purchased from us (laser.com/cbus-shop.co.uk) then we'll be happy to reflash it with 7.056 and return it ...   Saturday Aug 30th, 2014 07:52 pm

juwi_uk wrote: Oh my mistake.  I understand the eeprom I mentioned is 256K bits not bytes.  That said couldn't you save part of the firmware ...   Saturday Aug 30th, 2014 07:41 pm

juwi_uk wrote: The UCM/GSM4 baseboard has a 256K eeprom (24LC256) in U2 for a start so 32K cannot be the max even if you have in your ...   Saturday Aug 30th, 2014 04:44 am

juwi_uk wrote: Save the previous version to the U3 chip before the new upgrade download starts.   If it fails for any reason then restore from ...   Friday Aug 29th, 2014 06:04 pm

You'll most likely need a PC to talk to the Nest servers using their API and also Comfort. Getting it working with just the UCM ...   Wednesday Aug 13th, 2014 02:53 am

Why not just alter the baud rate on the box? You're not going to be connecting to it from Comfort and your software at the ...   Sunday Aug 10th, 2014 09:24 pm

The new ETH03 appears to use a PIC which I assume would be something like the PIC18F67J60 which has built in 10Mbps Ethernet. I assume ...   Monday Oct 7th, 2013 01:27 pm

There are a couple minor mistakes in the manual as it makes multiple references to the ETH02 module when it only works with the new ...   Monday Oct 7th, 2013 01:19 pm

Is there any way of disabling the button press "clack" sound? ...   Wednesday Dec 12th, 2012 09:38 am