I am interested in using the Z-Wave Danfoss Living Connect Radiator Thermostat in combination with my Comfort system.  However having read the above am somewhat ...   Friday Apr 18th, 2014 12:20 am

Okay & thanks. Have upgraded now. All works well. ...   Sunday Feb 23rd, 2014 04:56 pm

Any release date yet envisaged for the update? I am anxious to move onto iOS 7. Thanks ...   Saturday Feb 22nd, 2014 08:21 pm

Ident, I tried as you indicated today, and it worked for me. I separated the devices into single channel and multichannel devices, and used a separate ...   Tuesday Dec 3rd, 2013 05:08 pm

On the error which I reported in 3.7.6, I have tested doing an exit from comfigurator AFTER I have performed an "edit -> undo" on ...   Tuesday Dec 3rd, 2013 06:49 am

Thanks Julian. That's just the question I was going to ask ident, can we address a single Zwave BasicSetCommand UCM-ZWave command to multiple devices and more ...   Monday Dec 2nd, 2013 09:17 am

Thanks ident, I will try all that and see. ...   Monday Dec 2nd, 2013 08:42 am

Thanks ident. What you have demonstrated is the way I do my responses at the moment, but its not easy with 26 nodes/channels to address. Several ...   Monday Dec 2nd, 2013 07:22 am

Most of the z-wave devices I have, including those of different brands, have the ability to accept "all-on" and "all-off" commands from a controller. ...   Sunday Dec 1st, 2013 04:22 pm

Okay, thanks. ...   Thursday Nov 21st, 2013 06:57 am

Good morning, Can you give an update on when the ios7 version app for iPhone might be available? I ask because I have several non-Cytech apps which ...   Thursday Nov 21st, 2013 06:22 am

Changes in the way Response Wizard programs Zwave commands. Has there been a recent change in the way that the response wizard programs Zwave commands in ...   Wednesday Nov 6th, 2013 08:33 am

My file sent as requested. ...   Monday Nov 4th, 2013 06:13 am

As I mentioned elsewhere ( http://comfortforums.com/forum20/3544.html ), I get this error when I exit comfigurator AFTER I have performed an "edit -> undo" on a ...   Sunday Nov 3rd, 2013 07:06 pm

Okay I have upgraded to GSM4. As MikeGriff said, the modification is worth the effort. I join with him in thanking all at ...   Sunday Nov 3rd, 2013 04:10 pm

Thanks Ident. 1) Just to be sure, do you mean that, even with 7.040, I should disconnect the slaves? 2) How do I know if I have ...   Friday Nov 1st, 2013 03:23 pm

Question: If I use the option "Edit -> Fix All Responses", would this stop the assigned zwave virtual node response from changing? ...   Wednesday Oct 30th, 2013 07:11 pm

I then try to correct the error involved, and on trying to save get the instruction to write again to EEPROM. If I did that, ...   Sunday Oct 27th, 2013 10:53 pm

Specifically, in the UCM-Zwave, the Register Number is HOWEVER unchanged at "435", the Register Name is CHANGED to "UtilityDoorOff". This is the wrong response ...   Sunday Oct 27th, 2013 10:51 pm

I then go the "Responses", Select the response "StartupResponse", select "Response Wizard". I Select "Append New Action" or "Insert New Action". Select "Counter". Select "Initialise" Select a counter and ...   Sunday Oct 27th, 2013 10:47 pm

Also look at the responses and the numbers attached to the responses ("ZWave-3.jpg"). Note that "UtilityDoorOn" is #435. ...   Sunday Oct 27th, 2013 10:46 pm

I have managed to recreate the error I spoke of in one particular situation, though there must be others. I have a number of screenclips which ...   Sunday Oct 27th, 2013 10:45 pm

Mike, Thanks. Just to be clear, in the attached close up jpg you mean solder a link between the two point labelled "U2" and "J4" (red ...   Sunday Oct 27th, 2013 04:26 pm

I think I need to do a vocab upgrade as I see a lot more words available in the kate and myma files than my ...   Sunday Oct 27th, 2013 03:43 pm

Okay thanks, I've found the U2 and you are right: no socket. ...   Saturday Oct 26th, 2013 01:26 pm

Thanks ident. Do you know if my module has the IC socket in the U2 position, or whether I will have to solder one onto the ...   Saturday Oct 26th, 2013 01:13 pm

Thanks ident. I have posted to the main forum topic a request for help in identifying my upgrade path to GSM4. ...   Saturday Oct 26th, 2013 12:43 pm

Can you advise me what my upgrade hardware path would be from the attached jpg of the GSM module which I have. Its currently ...   Saturday Oct 26th, 2013 12:30 pm

Unfortunately I cannot simply recreate the error. I will try and see if I can identify the actions which precede the change, and let you ...   Saturday Oct 26th, 2013 10:02 am

This happened once with my own cclx file. It hasn't repeated so far. I need to see a pattern before I can take it ...   Saturday Oct 26th, 2013 09:48 am

GSM4? I have had my GSM for a number of years. My GSM is currently on 6.081 firmware. If I update it to 7.029 ...   Saturday Oct 26th, 2013 09:46 am

I have a problem identified with Comfigurator and Z-Wave. It also happened with 3.6.8, and possibly before that I don't know. In the UCM Z-Wave Mapping, a ...   Friday Oct 25th, 2013 10:12 pm

On Windows 7, complete with all updates, the attached errors on attempting to close the program. ...   Friday Oct 25th, 2013 09:54 pm

I changed the names of several alarm types to use them for my own purposes. Not the obvious ones - intruder, etc. This enabled ...   Friday Oct 25th, 2013 09:35 pm

Any news on the fix for the apps? ...   Wednesday Oct 23rd, 2013 06:34 am

Thanks. I connect via an ETH UCM running on 7.016. I assume therefore that the new Comfig version will work. ...   Sunday Oct 6th, 2013 10:04 am

I note that you say "The new features described here require Comfort and UCM firmware version 7". One of my Eth modules is an ...   Saturday Oct 5th, 2013 05:06 pm

Since the app currently detects when it has entered the home wifi local area network, would it be possible to have the app inform Comfort ...   Sunday Sep 8th, 2013 05:18 pm

I checked Zone 31 (Hex 1F) several times and on each time received the 70 response. At the same time the "module status" in comfigurator ...   Friday May 31st, 2013 08:37 am

Thank you for this information, very useful as the potential difference is (as you say) related to the resistance on the circuit. I have checked ...   Thursday May 30th, 2013 09:54 am