Hi Slychiu, It's great to hear from you. I hope all is well with you. Thank you for the reply. From my understanding this is what I ...   Sunday Aug 6th, 2023 07:51 am

Hi, Is it possible to do this? Ideally I'd like to set it to a value that has been stored in a counter. I figured there must ...   Saturday Aug 5th, 2023 03:23 pm

Ok. I see the shunt now. Thank you for the explanation ...   Thursday Oct 22nd, 2020 08:15 am

Thanks, that explains the differences. How can I find my exact board model. On the DSI01 page on this forum the CM9001 board has a ...   Wednesday Oct 21st, 2020 08:19 am

I have old board which I was trying to replace because LP51,LP52 have blown and I figured I might as well upgrade the board instead ...   Saturday Oct 17th, 2020 06:49 pm

After a number of false alarms I have decided to implement most of my zones as alert zones. They are set to either AlertAway or ...   Tuesday Feb 4th, 2014 07:48 pm

Thanks for for taking the time to answer my questions. I believe I've eliminated what's introduced by the sensors but still see a delay which ...   Monday Oct 28th, 2013 03:53 pm

I think you've partly answered my question but I don't quite see how some of what you say is relevant. Latency and bandwidth are two ...   Wednesday Oct 23rd, 2013 09:00 am

Ok. So I've now compared the two and I can see more latency on the ETH02. When you say "The UCM directly sends all messages ...   Tuesday Oct 22nd, 2013 03:58 pm

Hi, I'd like to determine the means of interfacing with comfort that will have the least latency in communicating sensor and alarm state to an external ...   Monday Oct 14th, 2013 03:46 pm

I believe I've been looking in the right place. 'arm' was a typo, I meant 'alarm'. I've sent you my cclx file. Thanks you helping ...   Monday Sep 17th, 2012 06:30 am

My modules are already detected. I've tried writing everything to comfort using comfigurator a couple of times and it hasn't worked. Changing the Alphanumeric ID has ...   Sunday Sep 16th, 2012 12:15 pm

Hi, After upgrading firmware to 6.022 and uploading a new configuration I have lost the Alarm Phrases. For example, I used to recieve this sms message: 0000-BATTERYWARNING-01 But now ...   Thursday Sep 13th, 2012 09:18 pm

Hi, I'm manage to lose the pdf which contained all the commandd and queries you send to a UCM and the format of the response. I've ...   Saturday Sep 10th, 2011 10:07 am

I'm considering some home automation software which runs on a Java VM and was wondering if anyone has developed a Java API for comfort?   Thanks, Tas ...   Saturday Sep 10th, 2011 09:46 am

Hi Slychiu, Thanks for your interest and support. I think the most challenging part will be emulating the controllers (the parts of comfort that have firmware) ...   Wednesday Dec 16th, 2009 09:27 am

Hi Ingo, Thanks for your interest. Yes, the UCMs could get interesting if you want to simulate the whole system with thrid party UCMs. For now ...   Wednesday Dec 9th, 2009 05:48 pm

Hi all, Firstly thanks to the comfort community. Without your help I would not love the product as much as I do. I've been wanting to develop ...   Wednesday Dec 9th, 2009 11:12 am

Hi, Thanks for helping. Yeah, I am familiar with the procedure and beleive I did the firmware updates correctly. The UCMs weren't working when I quit last ...   Wednesday Dec 9th, 2009 09:52 am

I was able to find Firmware version 5.145 so I tried that and I get different results. The system is still not working but it's ...   Tuesday Dec 8th, 2009 08:48 pm

Hi, I thought it would be a good idea to upgrade to the latest firmware but I am now unable to get my system working again. I ...   Tuesday Dec 8th, 2009 06:28 pm

Thanks. This is great. ...   Tuesday Dec 8th, 2009 03:32 pm

I once had a false alarm which I can only guess was caused by a misfiring PIR sensor. I don't have the system linked to ...   Thursday Dec 3rd, 2009 10:36 am

I really appreciate what you are saying. My application requires a much 'softer' approach and Rako relays lacks the flexibility and cost constraints. As there ...   Wednesday Mar 11th, 2009 07:17 pm

Hi, Does this mean two-way RAKO is no longer an important feature for Cytech to develop? Thanks, Tas ...   Tuesday Mar 10th, 2009 11:40 pm

Hi Nigel! Yes. I am still very interested in this. Tas ...   Friday Mar 6th, 2009 09:42 am

Thanks, I've used the commands as you described and got it working but I'm getting different responses than those you describe. For example flag 5 returns RA00 ...   Monday Jan 5th, 2009 05:22 pm

I've have been trying what you suggest but can't get it to work. The response I get back from the "DA840203" command alternates between RAC2 and ...   Thursday Oct 30th, 2008 09:40 pm

Hi Mike, Thanks for your response but that is not what I am trying to do. I do have other USMs and GSM modeuls but these ...   Friday Oct 3rd, 2008 08:29 am

This is great. I will try that. Many Thanks, Tas ...   Thursday Oct 2nd, 2008 10:48 pm

I can see that this is a good way of protecting against someone who doesn't know the code. The possible attack I am trying to ...   Thursday Oct 2nd, 2008 10:47 pm

Searched all the manuals and can't see a way to do this. ...   Thursday Oct 2nd, 2008 07:46 pm

I am controlling Comfort using an RS232 device which joins a wireless network. The uses are primarily home control and for easy arming of the system at ...   Thursday Oct 2nd, 2008 02:16 pm

This is good to understand. Thanks for the help guys. ...   Wednesday May 7th, 2008 03:11 pm

Hi, I have just upgraded to firmware 5.121 and noticed different behaviour in the keypads. I'm not entirely sure that the keypads didn't exibit this behaviour ...   Wednesday May 7th, 2008 09:18 am

Thanks for the help. This was the problem. Introducing timer delays has resolved the problem. ...   Thursday Feb 21st, 2008 08:31 pm

I forgot to mention that Night Mode is actually active...  activating protected zones triggers the alarm. Thanks again, Tas ...   Wednesday Feb 20th, 2008 11:38 pm

My LCD kepads no longer indicate the status of Night Mode. I beleive that they used to indicate Night Mode by displaying the mode name ...   Wednesday Feb 20th, 2008 11:35 pm

I'm a currently programming comfort for my home, part of which is integrating it with a RAKO lighting system. The current firmware does not provide ...   Wednesday Feb 20th, 2008 12:47 pm