I dont know why the link in the above post was missing. http://www.comfortforums.com/view_topic.php?id=1139&forum_id=40 ...   Friday Nov 21st, 2008 11:08 am

No I am afraid you will have to use the method described in the previous posts. Do you find the beep too loud? Are you ...   Friday Nov 21st, 2008 07:12 am

Yes the UCM05 is an advanced version and a replacement for UCM01 so it can be used for this purpsoe You are correct, power the keypad ...   Friday Nov 21st, 2008 07:04 am

This is a photo of one of the Training Rigs used in the course. Equipment can be mounted on both sides so access is convenient. ...   Thursday Nov 20th, 2008 08:42 am

You can connect it to a relay connected to Comfort output, not to the output itself ...   Thursday Nov 20th, 2008 03:26 am

We can obviously disable this in the firmware but that would mean everybody would be deprived of the keypad beeps which serves other purposes for ...   Wednesday Nov 19th, 2008 11:43 am

Most people like to have auditory confirmation of each keypress. I think it is reassuring. The beeping is also used to signal when the keypad ...   Wednesday Nov 19th, 2008 12:21 am

Thats quite ingenious, but is silencing keypad beeps really necessary. After all unless you press them then they will not make any sound Is the keypad ...   Tuesday Nov 18th, 2008 12:05 pm

another screenshot of the CWM Applet Designer software ...   Monday Nov 17th, 2008 03:35 am

No it is no use to reinstall Comfigurator Step by step again Transfer > Monitor I/O - check thisDo Transfer > System InformationThe system will ask for ...   Saturday Nov 15th, 2008 12:24 pm

Engineer code is 6789 default Ignore the F0 key and enter 6789 as the engineer code ...   Saturday Nov 15th, 2008 07:32 am

If you do not have a keypad, then are you using the MinderPro as an alarm system? Presumably not because you need a keypad in ...   Saturday Nov 15th, 2008 12:31 am

Cytech is pleased to announce that the  new CWM02 Comfort Webserver Module is finally available, see the announcement in the CWM Forum http://www.comfortforums.com/forum49/279.html ...   Friday Nov 14th, 2008 01:08 pm

The CWM Applet Designer allows users to design their own webpages for the CWM02 Comfort Webserver A simple drag and drop interface allows sample images to ...   Friday Nov 14th, 2008 01:04 pm

Cytech is pleased to announce that the new CWM02 Comfort Webserver Module is now available. The above post introduces the product and shows a typical ...   Friday Nov 14th, 2008 12:45 pm

You can use a timer for up to 63335 seconds which is..... quite a long time as my calculator is not handy The following Response should ...   Friday Nov 14th, 2008 04:17 am

You would connect the ATA to TEL IN, not TEL OUT. The Ringer would not be needed as the system would be dialing a telephone ...   Friday Nov 14th, 2008 12:55 am

Thats a tricky one. The Door station rings the telephone by supplying a ring voltage (about 80VRMS) to TEL OUT. This would not work in yoour ...   Thursday Nov 13th, 2008 12:54 am

The Door station function in Comfort is able to call to max 8 telephone numbers when the doorbell is pressed in Away Mode This is in ...   Tuesday Nov 11th, 2008 07:19 am

You deserve a good night sleep then Watch for the Busy and Error leds if it does happen again ...   Tuesday Nov 11th, 2008 03:35 am

If the Response works it should work no matter what activates it One possibility is that there are too many commands sent to CBus at a ...   Tuesday Nov 11th, 2008 01:45 am

First, have you set the C-Bus UCM to the correct ID and the number of UCMs in Comfigurator to the correct value in your system. ...   Tuesday Nov 11th, 2008 12:59 am

In Piced version 4, the security application is built in so you do not have to find Application 208 anymore To arm to Away Mode, go ...   Tuesday Nov 11th, 2008 12:34 am

If I understand you correctly, you would like to be able to send the X10 and IR and simulate the siren sounds when you do ...   Thursday Nov 6th, 2008 11:20 pm

Comfigurator Beta 2.9.7 is now available for download from here http://www.cytech-technology.com/temp/software/Comfigurator2.9.7.zip This version fixes bugs found so far Please feedback bugs and findings to this forum or ...   Thursday Nov 6th, 2008 01:00 pm

2 November 2008 - see the Guest Commentary by L Y Chiu from Cytech in Hiddenwires  http://hiddenwires.co.uk/resourcesarticles2008/articles20081103-03.html ...   Wednesday Nov 5th, 2008 12:47 pm

Thanks for the suggestion. You mean you would like to hear the caller number when you receive a call fro, Comfort when someone has left ...   Wednesday Nov 5th, 2008 12:12 pm

Q1 - If my memory is correct, if you do not record a user name for your father, you can leave an internal message by ...   Wednesday Nov 5th, 2008 12:09 pm

Hello,   Cytech’s Comfort Intelligent Home System is now featured on The Building Centre website http://www.buildingcentre.co.uk and their http://www.specifinder.com product information service.   We hope ...   Tuesday Nov 4th, 2008 12:24 pm

If there were no other changes the board may have been damaged, not by the power failure but perhaps by a lighting strike or surge ...   Tuesday Nov 4th, 2008 12:25 am

The DS01 metal door station has a model with colour camera PL41PC - Door station with Colour camera PL71 - Back box for flush mounting PL81 - Hood ...   Tuesday Nov 4th, 2008 12:11 am

The programming of the Disarm Response is shown ...   Monday Nov 3rd, 2008 12:56 am

Make sure you use the attached file cbusdemo1.ccl in the previous post See the screenshot below of the Counters page where you can see the Response ...   Monday Nov 3rd, 2008 12:54 am

For Firmware Upgrade instructions, please go to this topic http://www.comfortforums.com/forum4/1783.html ...   Sunday Nov 2nd, 2008 06:34 am

Note: If the Comfort Firmware is version 5.xxx you need to use the UCM programming cable to upgrade the firmware as described here. If the Comfort ...   Sunday Nov 2nd, 2008 06:20 am

The new UCM/GSM2 module is now available. The new module has all the capabilities of the old UCM/GSM but at a much lower cost. We intend ...   Sunday Nov 2nd, 2008 04:14 am

Cytech is  pleased to announce that the new UCM/GSM2 module is now available. The new module has all the capabilities of the old UCM/GSM but ...   Sunday Nov 2nd, 2008 04:12 am

PL41PC with camera with PL91 Rain shelter is shown ...   Sunday Nov 2nd, 2008 03:52 am

PL91 Rain shelter for surface mounting any of the modules; PL11P audio only, PL41P with mono camera, or PL41PC with colour camera. This replaces the ...   Sunday Nov 2nd, 2008 03:50 am

PL71 Back box for flush-mounting the PL11P (no camera) or PL41P (mono camera) or PL41PC (Colour camera) There is also a hood cover PL81 for the ...   Sunday Nov 2nd, 2008 03:48 am