The new version 2.9.11 is available from http://www.cytech-technology.com/temp/software/Comfigurator2.9.11.zip The problems mentioned should be fixed However the known bugs still present in this (and previous) versions are Read (Transfer ...   Tuesday Jan 27th, 2009 11:55 am

Thats quite confusing. The tamper header in Comfort has 2 pins. a 3 way terminal block is used to provide an extra connection point to connect ...   Tuesday Jan 27th, 2009 02:35 am

Yes, unplugging a SCS or any other module wil cause a communication failure However the situation with your Comfort (ie keypad does not respond) could be ...   Monday Jan 26th, 2009 09:46 am

The .clg files are in plain text format eg 00/00  00:00 Zone Trouble - Zone #CINEMASENSOR2 (13) 00/00  00:00 Zone Trouble - Zone #CINEMASENSOR2 (13) 00/00  00:00 Zone Trouble ...   Monday Jan 26th, 2009 08:39 am

I suspect one of the devices on the KA/KB is locking up the Rs485 bus. It could be one of the slaves of SCS or ...   Monday Jan 26th, 2009 08:34 am

Multiplication not possible at present ...   Monday Jan 26th, 2009 12:44 am

Did you set the CWM id shunts to 1, by default it is set to 2 Normally you can leave the 1st UCM unconnected and set ...   Monday Jan 26th, 2009 12:42 am

If there is no voice on the keypad, do a Vocab download. Your system may have lost the voice somehow TRansfer > Vocab download, select  kate28.bin ...   Monday Jan 26th, 2009 12:36 am

You always get an  RA reply immediately, whether it is meaningful or not Yes it would be much better to wait for the reply before sending ...   Wednesday Jan 21st, 2009 12:15 pm

This is to inform all that the dates of the next training course have been changed to 17th and 18th March 2009 at the same ...   Wednesday Jan 21st, 2009 11:47 am

You may not have to wait for the DA but I think there needs te be a slight delay between the end of 1 message ...   Wednesday Jan 21st, 2009 03:31 am

Interesting idea. We dont have such a sticker. Anyone else think that that would be useful? ...   Tuesday Jan 20th, 2009 12:42 pm

We have UCM/Zwave which sends commands to the Zwave wireless network. However we are working on a new and improved version so you should wait ...   Tuesday Jan 20th, 2009 12:40 pm

We found a problem in the conversion to ccl All the zone types have Night Mode disabled. You can edit the night mode setting in the zone ...   Tuesday Jan 20th, 2009 12:35 pm

ccl files are the format used in Comfigurator 2 cclx are the native format for 2.9.x (eventualy to be released as version 3). cclx files ...   Tuesday Jan 20th, 2009 12:18 pm

The Show status for Sensor should be avaiable in the release version the s?nn command to the UCM will return the value of the addressed sensor ...   Tuesday Jan 20th, 2009 12:36 am

Can you send your cclx file to support@cytech.biz so we can check if it is a bug or  due to something in your programming? \By the ...   Tuesday Jan 20th, 2009 12:25 am

I forgot to mention that the UCM/Ulti is able to control Ulti devices, see http://www.cytech.biz/Default.aspx?cmd=ID%2ftW5Xw2bTCO626ZAAInw%3d%3d&productid=81&categoryid=9&pageindex= ...   Monday Jan 19th, 2009 08:47 am

I suggest you look at Clipsals' Ulti switches. These can be retrofitted to normal. UK wall switches and do not require the Neutral wire. See ...   Monday Jan 19th, 2009 08:45 am

There is a resettable fuse which protects the siren and strobe. It opens when there is a short circuit Remove all the connections from the siren, ...   Monday Jan 19th, 2009 12:47 am

Comfort II does not support Partitiomning You can make use of the Day and Night modes for  partial arming of certain areas within the house to ...   Saturday Dec 13th, 2008 12:55 am

It should not take 5 seconds What is your firmware version? The delay may also be due to your response triggering other things Can you send the ccl ...   Friday Dec 12th, 2008 11:47 am

The UCM/GSM does not act as a stand-alone mode. It needs to be connected to Comfort in order for it to work. The telephone numbers ...   Friday Dec 12th, 2008 04:55 am

Comfigurator and DS Manager on a Mac is beyond my experience But the port setting to allow on the firewall shoukd be straihtforward. It needs to ...   Thursday Dec 11th, 2008 07:24 am

I suspect Avast is  a wee bit sensitive. Let us know if it happens for future versions regards ...   Tuesday Dec 9th, 2008 11:36 am

The purpose of the shunt is to cater for different products like Fermax, DP03X, DS01 etc so it is not always required to be removed. The ...   Tuesday Dec 9th, 2008 01:06 am

We are on holiday in Singapore but will check it out this week ...   Monday Dec 8th, 2008 02:02 am

Thats not possible with the UCM/GSM, although if you disconnect the telephone line Comfort will know and will use the GSM to dial all your ...   Sunday Dec 7th, 2008 04:12 am

November 27, 2008 Espoo, Finland - Nokia announced today it is developing a smart home platform, Nokia Home Control Center. The platform is opening a new ...   Sunday Dec 7th, 2008 03:29 am

Strange, I just checked with Zone Alarm antivirus and it did not report any infections. What was the trojan reported do you know? I have removed ...   Sunday Dec 7th, 2008 03:03 am

The J23 header on Comfort I is the equivalent of  J54 on Comfort II Plug in the cable from GSM J3 to J23 on Comfort ...   Saturday Dec 6th, 2008 09:50 am

"Copenhagen, 05 December 2008 – The first German shopping portal for home control devices using the popular Z-Wave mesh networking standard has opened for business: ...   Saturday Dec 6th, 2008 09:00 am

The screwdrivers are standard tamper proof types and I am told that the products will be supplied with them Another  photo of the audio only model ...   Saturday Dec 6th, 2008 01:50 am

See  the post in this forum http://www.comfortforums.com/forum44/1247.html ...   Friday Dec 5th, 2008 04:56 am

ibexcellence (part of the Building Research Establishment or BRE in the UK) has launched a report on how smart home technologies could help new dwellings ...   Friday Dec 5th, 2008 04:55 am

That is not recommended. Comfort RS485 bus  operates by polling and each device has an ID which is recognised by Comfort. Putting other devices on ...   Wednesday Dec 3rd, 2008 12:05 am

We will get this fixed before the next release soon ...   Tuesday Dec 2nd, 2008 11:59 pm

Warby This could be related to a known problem which is fixed by a Slave firmware (unreleased as yet) I will send you the firmware file ...   Tuesday Dec 2nd, 2008 01:26 pm

You have to do it programmatically. This is more flexible as it allows you to determine how often the updates should be. Too much traffic ...   Monday Dec 1st, 2008 10:11 am

There has been some problems reported that the UCM/Ethernet could not respond when used with Comfigurator. We had not been able to find the cause of ...   Friday Nov 21st, 2008 12:43 pm