Posted: Thursday Jan 31st, 2008 01:11 am |
|
1st Post |
akai
Member
Joined: | Tuesday Jan 29th, 2008 |
Location: | |
Posts: | 2 |
Status: |
Offline
|
back to top
|
IP before 10.0.0.16
IP new 192.168.0.10
I already change the new IP address using http://10.0.0.16/admin.htm. (Comfort Web Module Administration). In menu display I chose Module Setup. In the IP address and Net mask, I change it with the new IP address 192.168.0.10, Net mask 255.255.255.0, Port 80, and Pass-through port 10001.
Internet Connection I chose LAN connection. In LAN connection I include Gateway IP : 192.168.0.1 ( my router IP address ) Name Server 1 IP : 202.133.0.188, Name Server 2 IP : 202.133.1.5, when finish this section CWM going to reset, after CWM reset finish I check the IP address already change to 192.168.0.10.
When I go to test http://192.168.0.10/ the browse is error 404.
When I go to ftp://192.168.0.10/ is can go in. I already check index.htm file is inside ftp.
regard
akai
|
Posted: Thursday Jan 31st, 2008 06:13 am |
|
2nd Post |
leonchue
Cytech
Joined: | Monday Aug 7th, 2006 |
Location: | Singapore |
Posts: | 71 |
Status: |
Offline
|
back to top
|
Is CWM working with 10.0.0.16 before the IP change?
If yes, do a check from http://192.168.0.10/admin.htm (if you are able to access the page), to see if the settings are correct?
If all settings are correct, do a power reset on the CWM (ie. switch off the power adapter. After a few seconds, switch it on again). Check if it works this time.
If still not working, then do a cross-cable between your PC and CWM. That will take away network related problems.
1) Power off CWM.
2) Connect a network cross-cable between your PC and CWM.
3) Power on CWM.
4) Access http://192.168.0.10 (your pc should be in the same subnet, ie. having a different IP address but same network mask)
Hope this helps.
|
Posted: Friday Feb 1st, 2008 05:18 am |
|
3rd Post |
akai
Member
Joined: | Tuesday Jan 29th, 2008 |
Location: | |
Posts: | 2 |
Status: |
Offline
|
back to top
|
hai...
I already use this setting before this, but it still same problem.
Now my connection already in cross cable betwen touchscreen computer and CWM.
|
Posted: Friday Feb 1st, 2008 05:49 am |
|
4th Post |
leonchue
Cytech
Joined: | Monday Aug 7th, 2006 |
Location: | Singapore |
Posts: | 71 |
Status: |
Offline
|
back to top
|
I don't understand what you mean by that. I will contact you privately to help you out.
|
|