| Moderated by: admin | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
koutsogiannis Comfort Installers 
|
Hi I write first time for with the occasion I would want you to wish good and creative year. Here in Greece many henceforth installations have become with the dupline (dupline.com) and with InOne by Legrand, but no one from the alarms that exist here do not support this protocols. This means that I can be addressed in houses of small size but also big that have installed the systems and apply with success comfort. The Legrand has Projects and also 70m2. In the past I made a effort work the dupline with Stargate (http://www.jdstechnologies.com) and him I accomplished because me they gave his protocol of communication. With Legrand him I did not accomplish, despite only with the IR oy it allocates. I wait for your news. Thanks Thanasis Koutsogiannis |
|||||||||
|
slychiu Administrator 
|
We do not have in interface to Dupline, as the product is mainly used in industrial applications rather than residential. However the serial protocol for the UCM may allow you to send commands to any external device. The protocol can be downloaded from our web site link http://www.cytech.biz/Downloads/Files/163/rs232.pdf This protocol works with RS232 (UCM05) or Ethernet (UCM/Ethernet) or RS485 (UCM04) In Comfigurator, there is a Send RS232 Action which allows you to send any arbitrary strong to the UCM to the external device. Legrand InOne is a closed system. However we have projects where the integrator has opened their RF switch and conected Comfort outputs via relays to "press" the switch to control the Legrand system. This should work for you too |
|||||||||
|
admin Administrator 
|
This topic has been moved from the Installers area to the Lighting Interfaces forum as it could be of interest to other users |
|||||||||
|
Billan Comfort Installers 
|
Here in Greece we are working a lot "dupline". If Comfort was cooperating with modbus then it would communicate with dupline. So, a UCM MODBUS would be ideal for us in order to install 10 pieces per year in others people installation. Last edited on Wednesday Nov 4th, 2009 06:06 pm by Billan |
|||||||||
|
slychiu Administrator
|
a Modbus interface may be what we could do in future, but it is not immimnent as we have many projects to complete |
|||||||||
|
Billan Comfort Installers
|
any progress with modbus? |
|||||||||
|
slychiu Administrator
|
We are not doing Modbus at the moment. The Comfort Client developed by Julian Wigman has a Modbus plug in, see http://www.comfortforums.com/forum65/1800.html It is very powerful software and free, you should download and test it, and the Modbus plugin Last edited on Wednesday Jul 28th, 2010 01:04 pm by slychiu |
|||||||||