Posted: Tuesday Nov 27th, 2007 09:55 am |
|
1st Post |
TheMax74
Member
Joined: | Monday Jul 16th, 2007 |
Location: | Italy |
Posts: | 247 |
Status: |
Offline
|
back to top
|
I noticed that in some circumstances, especially when disarming, X10 commands have some issues.
For example, when i come back to home i disarm the Comfort. There is a response associated to "disarm" event, turning on a light.
Often, instead of turning on this light, Comfort turns on another light on the same house code, or starts irrigation on another house code.
This issue has started with fw 5.115.
I've Comfort Ultra Gen 2
Is it a Comfort issue, or maybe X10 transceiver issue?
Thanks.
|
Posted: Wednesday Nov 28th, 2007 12:57 am |
|
2nd Post |
admin
Administrator
Joined: | Saturday Mar 3rd, 2007 |
Location: | Singapore |
Posts: | 1200 |
Status: |
Offline
|
back to top
|
Can you use the Comfigurator Monitor Mode to Monitor the messages when this happens. The X10 commands transmitted by Comfort will be reported. This will indicate if Comfort is sending the correct X10 commands
There were no changes to the X10 function in 5.115. Perhaps you could also switch back to 5.113 and verify if the same problem occurs
|
Posted: Wednesday Nov 28th, 2007 06:41 am |
|
3rd Post |
TheMax74
Member
Joined: | Monday Jul 16th, 2007 |
Location: | Italy |
Posts: | 247 |
Status: |
Offline
|
back to top
|
Ok, i will do it.
In the meantime, this is the response associated to "Disarm" event
If SecurityMode = AwayMode Then
X10 Abatjours-Letto On
X10 Presa-Climatizz On
If Flag LuceAutoCucina <> 0 Then
X10 Luce-Soggiorno On
End If
End If
I suspect not enough idle time between X10 commands; maybe do x10 transceiver misunderstand command sequences ?.
I give a try with monitor and i let you know, but for me, Comfort is sending x10 commands correctly.
Thanks.
|
|