Posted: Saturday Oct 15th, 2022 05:50 am |
|
1st Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
SEM 7.118
Known Bugs - Strobe does not work on Slave. This is not a new issue
Bugs Fixed
- Fixed bug SEM sent ack 4DH to Comfort which is only used by KP LCD and caused problems
Changes- Auto Detect LEM03 on SEM. LEM03 can be connected to the last SEM in the system
- Suppprt EL (EOL query) command. Supports software eol feature for setting of No EOL or Double EOL without use of Shunts (requires new Hardware)
- Accept single message from Comfort with 31 zone types at reset
- Support ID Button to set SEM ID (if button is present). Requires new hardware
- Handle rs485 comms status 92H message
|
Posted: Saturday Oct 15th, 2022 05:51 am |
|
2nd Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
SEM 7.141
Bugs Fixes- Copy ID could not set ID to 5
- Slave zone analog value was not correct Not affect 7.117
- Strobe did not work on slave
- Fixed Intermittent Communications Failure which may occur every day or every few days, applicable for Slave PCB hardware without Zone EOL shunts
|
Posted: Saturday Oct 15th, 2022 05:52 am |
|
3rd Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
SEM 7.142 (17/9/21)- Fixed BUG for digital zone on CM9001/SEM . If zone value is 060H it should be zone OFF, but CM9001/SEM reports as ON. also for non digital zone, trouble SC reports as OC
|
Posted: Saturday Oct 15th, 2022 05:54 am |
|
4th Post |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
SEM 7.207 (1/10/22)- SEM can have ID = 7 for model EX
- SEM ID button can set ID=7
- SEM for EX can have 128 outputs but RIO is not included
- Fix BUG from 16/7/16 slave initial zones is always off! confirmed that in SEM 7.142 initial zone states is always off
- Low battery in Slave will be reported after 60 seconds. Prevent false report of Low battery from Slave
- Fixed bug SEM may hang at reset after 27/3/12
- Improved operation of ID button
- SEMs LEM zones did not work from 16/2/22 7.195
|
|