Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Slave (SEM) Firmware 7.118 to 7.207
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Saturday Oct 15th, 2022 05:50 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

SEM 7.118
Known Bugs
  1. Strobe does not work on Slave. This is not a new issue
Bugs Fixed
  1. Fixed bug SEM sent ack 4DH to Comfort which is  only used by KP LCD and caused problems

Changes
  1. Auto Detect LEM03 on SEM. LEM03 can be connected to the last SEM in the system
  2. Suppprt EL (EOL query) command. Supports software  eol feature for setting of No EOL or Double EOL without use of Shunts (requires new Hardware)
  3. Accept single message from Comfort with 31 zone types at reset
  4. Support ID Button to set SEM ID (if button is present). Requires new hardware
  5. Handle rs485 comms status 92H message



 Posted: Saturday Oct 15th, 2022 05:51 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

SEM 7.141
Bugs Fixes
  1. Copy ID could not set ID to 5
  2. Slave zone analog value was not correct Not affect 7.117
  3. Strobe did not work on slave
  4. Fixed Intermittent Communications Failure which may occur every day or every few days, applicable for Slave PCB hardware without Zone EOL shunts



 Posted: Saturday Oct 15th, 2022 05:52 am
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

SEM 7.142 (17/9/21)
  •   Fixed BUG for digital zone on CM9001/SEM . If zone value is 060H it should be zone OFF, but CM9001/SEM  reports as ON. also for non digital zone, trouble SC reports as OC



 Posted: Saturday Oct 15th, 2022 05:54 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

SEM 7.207 (1/10/22)
  1.  SEM can have ID = 7 for model EX
  2.  SEM ID button can set ID=7
  3.  SEM for EX can have 128 outputs but RIO is not included
  4.  Fix  BUG from 16/7/16 slave initial zones is always off! confirmed that in SEM 7.142 initial zone states is always off
  5.  Low battery in Slave will be reported after 60 seconds. Prevent false report of Low battery from Slave
  6. Fixed bug SEM  may hang at reset after 27/3/12
  7. Improved operation of ID button
  8. SEMs LEM zones did not work from 16/2/22 7.195



 Current time is 07:23 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems