Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

UCM 7.141 to 7.176
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Dec 11th, 2020 03:54 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM 7.141
  •   Implemented wifi01 NTP update time at 00:10 hours or 10 minutes after each hour if not updated on the same day
  •   "SB" strobe proc232_strobe command
  •   Fixed BUG - report_counter counter value was corrupted so Comfort Increment Counter, Decreent Counterr actions  did not return correct value in saveuservalue
  •   If UCM is doing firmware upgrade by UCM programming cable,  suppress mesages Cs01 or Cs02  which may interfere with upgrading firmware



 Posted: Monday Jan 16th, 2023 11:12 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM 7.150
  1. Fixed bug from 18/11/20 Counter report gave wrong value CTNNvv
  2. Fixed bug if ucm/wifi does not log out, the timer for wifi reset  does not work
  3. RS232  check for parity, framing and Overrun errors before reading data, so errors are not read into receive buffer
  4. Fixed Bugs in UCM DOWNLOAD and UPLOAD buttons
  5. RDY LED turns on at end of Upload/Download



 Posted: Monday Jan 16th, 2023 11:13 am
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM 7.166 (17/8/22)
    1. Fixed wifi reset issues,  wifi not work after some time
    1. fixed bug from UCM 7.156  C!NNVV will reply ERNN
    2. Fixed  bug CTNNVV missing CT just NNVV is reported.



 Posted: Monday Jan 16th, 2023 11:17 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM 7.167 (30/8/22)Bugs
  1.  BUG from 26/12/20 did not check modbus master before call checking modbus to Comfort table. affect ucm/modchanged from master to slave - may send wrong info to master . may cause slave not to get correct info from CM9001    7. 
Changes
  1.    Fixed BUG Reply to C?NN was wrongs
  2.    d? query will reply d?00 if tmrmotion disabled (NOT NA)



 Posted: Monday Jan 16th, 2023 11:19 am
   PM  Quote  Reply 
5th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM 7.176 (1/1/23)
  1.  Fixed BUG for SW7  ID setting did not work if all switches ABCD are off
  2.  If wifi submodule is detected by UCM at reset, ERR LED will turn on and remain on. If others are detcted eg USB, ETH, ERR led will be off
  3.  For newer USB submodules, connection to the PC supplies power to the USB. If at UCM/USB  power on, the USB is not con nected to the PC, the wifi is detected wrongly, and the UCM/USB will not communicate.  The ERR LED will then be ON. To fix this problem just press the RESET button on the UCM (after he USB is connected to the PC). For older USB hardware, pressing RESET will not do - a power cycle is needed. see http://www.comfortforums.com/view_topic.php?id=5413&forum_id=73 for more about this
  4.  Upgrade SEM by ucm firmware upgrade cable updated for beter performance and reduce errors, fixed problems
  5.  Implemented UUID for future feature

Last edited on Tuesday Jan 17th, 2023 01:14 am by slychiu



 Current time is 01:07 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems