Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
theshepherdmatt Member
|
Hi guys, I have recently purchased a farfisa PL11P bundle with a DM02, I have successfully installed the door station and DM02 and all is well. Phase-2 Now I need Comfort to open my gates via the keypad and this is where my knowledge and programing of comfort is limited. Any help will be much appreciated Many thanks Matt |
|||||||||
slychiu Administrator
|
Here are the instructions to open door/gate using DM02 Programming the Door/Gate Relays A door strike or automatic gate can be opened from the Door Station menu. The two menu commands; “4 to Open Gate, 7 to Open Door†can be programmed to open a gate or a door using a relay connected to any Comfort output or the relays K1 (Gate) and K2 (Door) on the DM02.
Pulse Output01 For 20 Endif If DoorStationId = 50 Then Pulse Output02 For 20 Endif If DoorStationId = 51 Then Pulse Output03 For 20 End If The above Response for Open Gate or Open Door Response will pulse Output 1 for DP ID 1, output 2 for DP ID2 and Output 3 for DP ID 3. Note that the relays are rated at 30VDC 3 A |