Comfort Automation/ Security System Forums > Products > Relay/Automation Modules > OP04 Output Submodule with 4 Relays |
Moderated by: ident |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
slychiu Administrator
|
OP04 is an Output Submodule with 4 Relays which plugs in to CM9001 in place of OP01 (with 8 open-collector Outputs). This connects 4 relays direct to Outputs 1 to 4 of CM9001. Outputs 5 to 8 are not available when OP04 is plugged in |
|||||||||
Swiss-Toni UCM Pi Users
|
With the OPO1 if the board goes you would just replace the board, if this goes you have to replace the board or is that a resetable fuse set into it, also what what is the voltage max capacity. |
|||||||||
slychiu Administrator
|
If this fails you also replace the submodule just line OP03 and OP01 It is less likely to fail than OP03 or OP01 because the relays have 5000V isolation/breakdown volatge. In OP01 and OP03 the outputs are open collector transistor outputs and are more easily damaged |