Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

NEW POWER SUPPLY PROBLEM
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rating:  Rating
AuthorPost
 Posted: Saturday Feb 2nd, 2019 11:31 am
   PM  Quote  Reply 
1st Post
Home
Comfort Distributors
 

Joined: Wednesday Jul 12th, 2006
Location: United Kingdom
Posts: 771
Status: 
Offline

  back to top

Mr VERY annoyed here........
Ive just come form a customers site after we installed a basic comfort alarm last week - i had left it un-commissioned because I had a very strange problem with a smoke sensor.
It turns out that the smoke sensor was not latching the relay due to comfort voltage being too low...... WHY.
The new switch mode power supply although delivering 14V ac to the CPU was only giving 10.8v to comfort power (nothing connected) and even less once other components were added.
PLEASE TELL ME THAT YOU HAVE TESTED THESE UNITS AND HAVE SOME ON SOAK TEST ETC ETC ETC...
I will now have to go back to site again with an old transformer.



 Posted: Saturday Feb 2nd, 2019 01:06 pm
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

I thought you were aware from previous correspondence that the new 15V DC power  supply is DC 15V, not 14 VAC, and it cannot be plugged into the CM9000 which requires a 14 V AC Tranformer
The DC power supply and 14V AC transformer are not equivalent
The new SEP01C comes with a new hookup diagram, an info sheet telling the differentce nbetween new and old slaves especially the power supply, and a complete manual explaingin everything in full



 Posted: Saturday Feb 2nd, 2019 01:08 pm
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

Slave DC power supply leaflet which is included in the SEP01C

Attachment: SEM01CPowerSupply_opt.pdf (Downloaded 11 times)



 Posted: Saturday Feb 2nd, 2019 01:09 pm
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

SEP01C Manual

Attachment: sem01Cman_opt.pdf (Downloaded 7 times)



 Posted: Saturday Feb 2nd, 2019 01:10 pm
   PM  Quote  Reply 
5th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

Slave hookup diagram on the lid of the enclosure

Attachment: SEM01C-connection-diagram-v1.0-print.pdf (Downloaded 9 times)



 Current time is 11:43 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems