Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Preventing Repeated Dial-outs due to multiple zone triggering
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Saturday Jun 2nd, 2018 02:17 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4209
Status: 
Offline

  back to top

When a zone opens and causes an alarm it will dial to the programed phonbe numbers for that alarm type (normally Intruder Alarm). If the zone (eg door or window) closes and opens again, it will cause another alarm and another dial out. If the cause is a window or door which is not properly closed and repeatedly closes and opens multiple alarms and dial outs will happen.

To prevent repeated activation of a zone from causing multiple dialouts, set the Zone Autoshunt Count accordingly see below screen. 0 means once the zone is activated and causes an alarm further activation of the zone ie close and open again will not cause any more dial outs. Default setting is 3


Last edited on Saturday Jun 2nd, 2018 02:20 am by slychiu



 Current time is 02:44 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems