So I have bought one of these
- http://www.hikvision.com/en/Products_accessries_857_i6482.html
Brilliant little thing - only needs 2 wires so its a really easy swap with my existing doorbell.
IT has the capability to also sound peoples existing doorbells.
Currently - I have a basic switch at the doorbell that goes back to a comfort input - when you press it comfort plays the doorchime (along with a bunch of other stuff).
Swapping that out and using the existing wires I can supply 24v to the doorbell and all works well.
When you press the bell button the voltage drops from circa 24v down to circa 20ish volts - if you have a look at the wiring diagram ont he second page here -
http://www.hikvision.com//uploadfile/image/11089_CUserswuqianyiDesktop%E4%B8%B4%E6%97%B6KB6003UD04258BSpecofDSKB6003WIPWiFiDoorbellV1.4.620170519.pdfhttp://www.hikvision.com//uploadfile/image/11089_CUserswuqianyiDesktop%E4%B8%B4%E6%97%B6KB6003UD04258BSpecofDSKB6003WIPWiFiDoorbellV1.4.620170519.pdf ]
you can see that that is what used to sound an existing doorbell.
What I want to find is something that sits where the mechanical chime should and changes state when the doorbell is pressed so I can monitor if the doorbell is pressed in comcfort - along with getting all the other benefits of a video doorbell.
Thanks in advance!
StuartLast edited on Wednesday Feb 14th, 2018 02:31 pm by schford
|