Author | Post |
---|
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
The beta firmware has the following improvements and bug fixes;- Bypassed zone now report in z? reply as OFF not on.
- Prevent f? flag states Report and SN report at reset without login
- UCM sends Cs01 if ID is not polled, sent Cs02 if there is no RS485 communications.
- U? add last byte 00 for non eth03, 01 for ETH03 This is to allow comfigurator to know if ETH03 is installed in future
- Fixed BUGs - sometimes UPLOAD and DOWNLOAD buttons on UCM did not work.
BUG !!- causes Vocab Upgrade to fail at 23%, 50%, 75 %
- COPY Button set ID could not set to maximum 8 From UCM 7.072
Last edited on Sunday Apr 15th, 2018 10:18 am by slychiu |
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
A bug may have been identified in UCM 7.109. It may cause Vocabulary Upgrade to Fail at certain completion rates eg 23%, 50% etc
UCM 7.109 has been withdrawn and UCM 7.098 is the latest release
Please downgrade to 7.098 before doing any Vocabulary Upgrade
|
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
UCM 7.110
Fixed BUG from 7.109 - Vocabulary Upgrade sometimes fails at 23%, 50%, 75 %
From UCM 7.110, the EM100 (Tibbo) ethernet module is no longer supported. Pleadse change the submodule to ETh003 or do not upgrade to 7.110
|
slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5495 |
Status: |
Offline
|
back to top
|
UCM 7.119 (23/3/2019)
- UCM/cbus2 Added Custom applications 1 and 2
- Fixed Bug E? Event log command E?FFFE FFFD did not work
- Fixed BUG send DA 197 command. Do action 197 send text to rs232 did not work. BUG from 22/12/17 UCM 7.110
- UCM/Universal transmit delay 600 ms between transmit. Found that some devices transmit too close together did not work (Dunkley)
- RD command if id = 01 and eeprom=0 dont read from self eeprom
- Reversed 11/6/18 change. caused RS11 to be sent only after UCM login so cannot log in 1st time
- Improved Cs01, Cs02 time outs sequences
- Fixed Bug Cs01 and Cs02 do not cause ETH03 to hang
- Restart RS485 comms timer when any character is received so that if comms lost after a complete message is received before the next STX, the comms will time out.
- Fixed BUG sent wrong value for alarm state ie S? gave alarm type
- added ?? command to reply CsNN
- after Bus communication is lost and UCM sent Cs02, when bus polling restores, dont send Cs01 before Cs00. Send Cs00 when id is polled.
- Fixed bug from 27/6/15 7.072 COPY switch ID could not set to max 8
UCM 7.117- UCM/Modbus allow each Modbus to comfort Line to have different Modbus ID
- UCM/Universal alternate product type = 27 modbus allow universal to upgrade to Modbus
- Universal UCM fixed BUG when message has terminator, compare failed because terminator is saved in buffer, and compared with device to comfort string which is without the terminator
- Fixed Bug in Modbus. Output from Comfort trigger counter to Modbus. Made UCM/Modbus 7.117 and Ucm/Velbus 7.117
Last edited on Wednesday Jul 17th, 2019 01:21 pm by slychiu |