Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

ULT 7.130-7.131 Beta
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Thursday Nov 9th, 2017 12:02 pm
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4029
Status: 
Offline

  back to top

The changes for this beta firmware are below. Please download from http://www.cytech.biz/comfort_ultra_firmware.html

Bugs Fixed
  1. RS232 Command Do Action 190, Wait for Action  (DABE) after action 190 did not work
  2. OPTIMUM reset Outputs command did not work
  3. Action 73,16 get keypad ID did not work
  4. Sign in tamper did not work (from 7.109)
  5. Voice menu for Keypad Area 4,5 - did not work
  6. Command CM received wrong reply for control menu affects mobile apps
  7. Partition keypad disarm did not turn off siren when partition is disarmed if there is trouble alarm, until the code is entered 2 times
  8. Fixed BUG from 20/6/15 DA multiple actions  corrupted by security action eg bypass do alarm
New Features
  1. Sensor Response is processed before sending Sensor report to rs485 bus to allow conversion before sensor report eg srNN
  2. Add action 159 conversion action - Needs Comfigurator 3.12
  3. When disarm any partition, and common siren is turned off, all partition siren outputs are turned off, and Keypad beeps are turned off on all keypads
  4. Scan for Modules -  when module does not respond and if it is present in eeprom, reduce the number of modules in eeprom of this type
  5. Scan for Modules if id replies to u? query and it was not in eeprom, increase the no if ids of this type in eeprom so a new module is automatically added withoout write to Comfort.
  6. At reset, Comfort scans for modules to increase the number of modules for a module that was not in eeprom but is detected, but if module was in eeprom but not detected dont reduce no of modules until scan for modules then reduce no of modules in eeprom for this type
  7. Eventlog for OPT can be increased to 600 if EEPROM size is increased to 256K bits
  8. For partitions, each partition has a siren output location. Requires CF 3.11.14
  9. 256 Nonvolatile flags and 16 nonvolatile counters for ULTRA not for OPTIMUM



 Posted: Tuesday Nov 14th, 2017 08:31 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4029
Status: 
Offline

  back to top

ULT 7.131 beta fixed a bug with ULT 7.130 for action Get keypad ID



 Current time is 07:31 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems