When disarm any partition, and common siren is turned off, all partition siren outputs are turned off, and Keypad beeps are turned off on all keypads
Scan for Modules - when module does not respond and if it is present in eeprom, reduce the number of modules in eeprom of this type
Scan for Modules if id replies to u? query and it was not in eeprom, increase the no if ids of this type in eeprom so a new module is automatically added withoout write to Comfort.
At reset, Comfort scans for modules to increase the number of modules for a module that was not in eeprom but is detected, but if module was in eeprom but not detected dont reduce no of modules until scan for modules then reduce no of modules in eeprom for this type
Eventlog for OPT can be increased to 600 if EEPROM size is increased to 256K bits
For partitions, each partition has a siren output location. Requires CF 3.11.14
256 Nonvolatile flags and 16 nonvolatile counters for ULTRA not for OPTIMUM