Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Comfigurator View Modes
 Moderated by: admin
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Sunday Oct 8th, 2017 10:53 am
   
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4292
Status: 
Offline

  back to top

Comfigurator 3.12.1 introduces several new View Modes which reveals only the features that are relevant to the application, and hides other features and settings that are not needed. This is because Comfigurator has become quite powerful and complex over the years, and may be confusing to new users.

The Viewing Modes are;

  • Engineer Advanced - This is the full view with all features. This is the existing viewing mode
  • Engineer Simplified - This is a simplified mode which hides seldom used screens and features, applicable to Comfort CM9000
  • Automation - This hides the alarm related screens and features, applicable to LGX01 Logic Engine and UCM/Logic systems without alarm and voice
  • EMS (Environmental Monitoring System) - This is for the new Cytech Environmental Monitoring System application
  • User - This is for users which hides the engineer programming screens. This is an exiting Viewing mode
To select a Viewing Mode, go to View > Mode







Last edited on Sunday Oct 8th, 2017 11:23 am by slychiu



 Posted: Sunday Oct 8th, 2017 11:32 am
   
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4292
Status: 
Offline

  back to top

Engineer Simplified Mode View Categories is shown below





The Alarms Category in Engineer Simplified Mode is shown below

Zones:



The Restore and Partition fields are hidden, as they are not used as often.
Restore is set to On by default. Restore tells the dialler to dial out to SMS and CMS when the zone is  restored after an alarm. Partition selects the zone to be one of 4 partitions in the alarm system. Partition is set to 0 by default.

In order to change the Restore and Partition settings for the zone, change the View Mode to Engineer Advanced. Even though the fields are hidden in Engineer simplified and other modes, the setting or parameter can be changed in Engineer Advanced.



Alarm Types




Dial Delay and Siren Delay are hidden in Engineer Simplified Alarm  Types. These are rarely used, but they can be changed in Engineer Advanced Mode

Phone Numbers



The fields Allow SMS Control, Allow SMS Arm, Allow SMS Disarm are hidden in Engineer Simplified mode. These parameters can be changed in Engineer Advanced Mode


Last edited on Sunday Oct 8th, 2017 11:49 am by slychiu



 Posted: Sunday Oct 8th, 2017 11:33 am
   
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4292
Status: 
Offline

  back to top

Automation Mode View Categories is shown below




Zone Types, Alarm Types, NonDetector Alarms, Phone Numbers, Status Outputs, Miscellaneous settings Siren Types, Sound Types are not shown because these screens are only applicable to Alarms

Zones/Inputs



The fields; Phrase, Entry Path, Partition, EOL, Announce are hidden because they are not applicable to Logic Engine, UCM/Logic and automation only systems





Last edited on Sunday Oct 8th, 2017 12:25 pm by slychiu



 Posted: Sunday Oct 8th, 2017 11:34 am
   
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4292
Status: 
Offline

  back to top

EMS View is shown below




Zone Types, NonDetector Alarms, Sign in Codes, Status Outputs, Miscellaneous Settings, Configuration Flags, Siren Types, Sound Types are hidden. Although these settings are applicable to the EMS system, the default settings are usually applicable. If these settings need to be changed, this can be done by changing the Viewing mode to Engineer Advanced. This this simplifies the programming interface


Zones/Inputs




Zone Types



The Zone Types Parameters are the same as Engineer Advanced but default Zone Types have been redefined for Environmental Monitoring


Last edited on Sunday Oct 8th, 2017 12:30 pm by slychiu



 Posted: Sunday Aug 5th, 2018 03:38 am
   
5th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4292
Status: 
Offline

  back to top

User Mode is described in this topic
http://www.comfortforums.com/forum20/3718.html



 Current time is 09:57 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems