Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Products > IRIO > IRIO Firmware 7.008 to 7.027

IRIO Firmware 7.008 to 7.027
 Moderated by: slychiu
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Sunday Aug 27th, 2017 09:21 am
   
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO Firmware 7.008
Bugs Fixed
  1. Fixed Dimmer to report counter.
  2. Fixed bug -Blinds AC function's down relay fails to switch off.  This is if feedback counter is assigned and it affects submodule 2 only.
  3. Fixed wrong input number reported, when Register Type is set to “Input” for “Digital Input”
New Features
  1. For Blinds AC function, extend “ignore current sensing” duration from 250ms to 1000ms. This is to compensate for hardware slow detection of low current motors.
  2. For Blinds AC function, LED is added to indicate current detection status.  The LED is turned on if current is detected.
  3. Support new “Calibration offset” parameter of Temperature Sensor input function.
  4. Input function Support of new “Virtual Input” register type, for various input functions.
  5. Supports new ISM08  submodule functions.

New Features require Comfigurator 3.11.14 and above

Last edited on Saturday Nov 4th, 2017 10:52 am by slychiu



 Posted: Saturday Nov 4th, 2017 10:40 am
   
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO 7.009
  1. Improved IR Signal input function.  Invalid counter values (ie. >63) are mapped to value 1 instead of ignoring it.  Useful in situations where signal 1 is ON signal.



 Posted: Sunday Oct 7th, 2018 05:58 am
   
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO Firmware 7.010

Supported new “Virtual Input” register type, for “Digital Input” input function.

Note that Comfigurator version  3.12.7 minimum is required

Last edited on Sunday Oct 7th, 2018 06:00 am by slychiu



 Posted: Wednesday Dec 11th, 2019 11:24 am
   
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO Firmware 7.014
  • Dimmer 0-10V Function, supports new Direction and Quick Press parameters. This allows different ways for the switch to control the dimmer output eg alternate pressto change direction, or only 1 direction up or down, for quick press and long press
  • Analog Output 0-10v function supports register flag assignment.
  • Analog Input (0-10v) function supports sensor value reporting, as long as sensor number is assigned (even if a Flag or Virtual Inputs is not assigned)

Last edited on Tuesday Jan 16th, 2024 06:18 am by slychiu



 Posted: Sunday May 8th, 2022 06:17 am
   
5th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO 7.017
 Proportional + Integral ( PI)  control function in analog outputs. 
  •  Output move direction is based on Summer/Winter flag status.
  •  When PI flag is off, analog output can be controlled via counter.
  •  Supported ramping for PI output.
  •  Bumpless transfer, with CO-bias feature,
  •  When PI flag goes off, output remains unchanged.
  •  Improved register reporting.
 Take note that if PI function is used, IR transmission function will be disabled,

IRIO 7.018
Changes for  PI control function:
  • Fixed calculation error on the integral part where it is not smooth.
  • Previously in some cases, the change was every 10 seconds.
  • Changed integral sum from automatic start, instead of taking the latest set samples.
  • Double gain limit to 32.
  • Added new “Sample time” parameter.
  • Added new “Direction” parameter.
  • Set checks for integral sum overflows.
IRIO 7.019
  • Supports 4 dimmers (analog outputs) for IRIO02.
  • Support ID detection for new ISM09,
  • Note that  ISM09 (for PT100)will be identified wrongly for older firmware

Last edited on Sunday May 8th, 2022 06:19 am by slychiu



 Posted: Friday May 12th, 2023 02:06 am
   
6th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO 7.024 

BUGS
  1. For IRIO/IO, Outputs mapped to Flag does NOT work. That means that if the mapped Flag set/clear does not affect the Outputs as expected. DO NOT Upgrade for IRIO-IO
Improvements and changes
Improvements in Proportional and Integral (P+I) Function for Analog Outputs, and fixed Bugs. Each IRIO and 2 Analog Outouts on the base board which provide 0 to 10V to control valves etc. These can work as independent P+I control. see the IRIO manual at http://www.cytech.biz/irio_module.html 

This can be used for Air Handling Unit (AHU) control

Last edited on Tuesday Jan 16th, 2024 06:17 am by slychiu



 Posted: Tuesday Jan 16th, 2024 06:16 am
   
7th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO Firmware 7.026 (18 Dec 2023)
Bugs
  1. For IRIO/IO, Outputs mapped to Flag does NOT work. That means that if the mapped Flag set/clear does not affect the Outputs as expected. DO NOT Upgrade for IRIO-IO
Changes and Improvements
Temperature Sensor Function in IRIO:
  1. This function is tuned to use with new sensor MF52D103F33950 instead of the beaded NTC temperature sensor with short leads .  This sensor comes with a 10 meter waterproof insulation shield which is more suitable for industrial monitoring.
  2. The temperature range has been widened to -30 to 100 degree Celsius (previously min 0 to 100 deg C). Return value of 101 if exceed upper limit (ie. 100). Return value of -31 if exceed lower limit (ie. -30) or sensor is not connected.

Last edited on Friday Jan 26th, 2024 07:13 am by slychiu



 Posted: Wednesday Jan 24th, 2024 05:26 am
   
8th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

IRIO Firmware 7.027  
Bugs fixed
  1. IRIO-IO (ISM08) outputs mapped to flag did not work - from IRIO 7.020

Last edited on Wednesday Jan 24th, 2024 05:27 am by slychiu



 Current time is 01:00 pm
Comfort Automation/ Security System Forums > Products > IRIO > IRIO Firmware 7.008 to 7.027
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems