Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

UCM/KNX2 7.087 to 7.097
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Monday Aug 7th, 2017 04:30 pm
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

KNX 7.087
Bugs
  1. Date and Time from KNX (when mapped to KNX) did not get sent to Comfort
Bugs Fixed
  1. Fixed Bug - bypass zone to KNX did not work
  2. Fixed bug on Bypass zones to KNX
  3. Fixed bugs in security modes to KNX.
  4. Fixed bugs in EIS10 2 byte counter, EIS5. sFixed bugs in EIS10 2 byte counter, EIS5.
  5. Fixed BUG: Action send command to KNX does not update Comfort register which is mapped to the KNX address
Changes
  1. Even if counter> KNX 1 bit programmed, send to KNX > Comfort 1-byte group address if present. Even if counter> KNX 1 byte programmed, send to KNX > Comfort 1 bit group address if present
  2. When sensor value changes, send sensor value to mapped KNX address KNX to Comfort mapped to Comfort sensor.
  3. When security mode changes, send value to KNX to Comfort for security mode group address.
  4. Added Status Message  "invalid physical address"
  5. UCM/KNX2 Status Error will appear if no confirmation for telegram to KNX.
  6. Improved status report to Comfigurator
  7. If no EEPROM, flash ERR LED


UCM/KNX1 firmware 7.079 can be upgraded to UCM/KNX2

Last edited on Sunday Jul 21st, 2019 03:49 am by slychiu



 Posted: Tuesday Aug 8th, 2017 01:37 pm
   PM  Quote  Reply 
2nd Post
eborges
Member
 

Joined: Tuesday Apr 27th, 2010
Location: Portugal
Posts: 9
Status: 
Offline

  back to top

Hi

I'm currently running my UCM/KNX2 on 7.097 Beta . I don't understand why a UCM/KNX2 7.089 is being released now with an inferior version number. Is it a typo ? Should it be  version 7.098 instead?

Regards



 Posted: Tuesday Aug 8th, 2017 04:30 pm
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

Actually we did not give the release notes for 7.087 so we are belatedly doing that now

7.097 is the latest Beta, which also does not have release notes of the changes for some reason. I will check what has changed in 7.097

Last edited on Wednesday Aug 9th, 2017 06:24 am by slychiu



 Posted: Wednesday Aug 9th, 2017 06:29 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM/KNX 7.097

Bugs fixed
  1. Send date and time from KNX did not work
Changes
  1. Speed up write to EEPROM by 30% by checking a block eeprom before erase
  2. at reset, all comfort zones are reported to KNX when Alarms to KNX > Zones Status is mapped to KNX. However there must be consecutive KNX 1 bit addresses corresponding to all programmed zones, otherwise there will be unacknowledged telegrams on the KNX bus

Last edited on Sunday Jul 21st, 2019 03:52 am by slychiu



 Current time is 10:38 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems