Comfort Automation/ Security System Forums > Third Party (interfacing to Comfort) > Miscellaneous Interfaces > RF Control For Roof Lights |
Moderated by: admin |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
The Old Scholar UCM Pi Users
|
I have a couple of roof lights with openers controlled by a stand-alone RF remote control handset (868.3Mhz). https://www.dh-partner.com/en/products/rcr-11-2.html Does anyone know how I can replace the remote control handset and control through Comfort? Ideally I would then operate via C-Bus switches. I’m stumped with this one so any help would be appreciated. |
|||||||||
slychiu Administrator
|
You can try to open up a remote control and expose the buttons contacts. Connect a Comfort Output to a RLY01 relay and connect the relay contacts to the button contacts that you want to operate. Use a Pulse action to the output to control the button of that remote - that would be like pressing the button manually However if the button operation is toggle instead of individual on and off, then you will not know if each action would turn on or off the lights |
|||||||||
Swiss-Toni UCM Pi Users
|
Would have to look at the control mechanism as it must have an alternative to the RF controller and use the mechanical switch to a comfort relay..... |
|||||||||
KennethFelt Restricted
|
** Spammer has been blocked ** Last edited on Saturday Jan 27th, 2018 12:03 pm by |