Comfort Automation/ Security System Forums > Support > Problems & Troubleshooting > Keypad > Can we turn off the yellow led "Off" light in disarm state for Keypad KP04A-WI |
Comfort Automation/ Security System Forums > Support > Problems & Troubleshooting > Keypad > Can we turn off the yellow led "Off" light in disarm state for Keypad KP04A-WI |
| Moderated by: admin | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
ccy Member
|
I have a keypad KP04A-WI. There is a "Off" led at bottom left. When the alarm is in disarm state, the LED will switch on. Can we turn off this led? |
|||||||||
|
slychiu Administrator 
|
Disable Show alarms (ie change to NO) as in screenshot the leds will go off after 30 seconds But why would you want that? The leds give importantr information about the alarm Attachment: showalarms.jpg (Downloaded 13 times) Last edited on Monday Feb 13th, 2017 08:46 am by slychiu |
|||||||||
|
ccy Member
|
This is the first time I use the Comfort alarm. How would I use the software to control the system? I have attached my alarm control board here. Attachment: Image.jpg (Downloaded 13 times) |
|||||||||
|
slychiu Administrator
|
If the system was installed by an installer, it is best to contact them You need Comfigurator software (free download) and a UCM/USB which you can buy from the same installer/distributor |
|||||||||
|
ccy Member
|
Can I buy the UCM/USB from you? How much would that cost? |
|||||||||
|
slychiu Administrator
|
we sell through distributors in each country. Please contact your distributor. If you have any problem then send email to support@cytech.biz |
|||||||||
|
Swiss-Toni UCM Pi Users 
|
Might be better of getting a etho UCM rather than usb ucm if you have iternet connection..... |
|||||||||
|
ccy Member
|
One supplier from Malaysia quote me the UCM module. The price are over expensive. |
|||||||||
|
slychiu Administrator
|
It depends on what you mean by expensive send an email to support@cytech.biz |
|||||||||