Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Getting Started Guide - community edition
 Moderated by: slychiu, mattbrain, benstinton
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Wednesday Feb 1st, 2017 07:46 pm
   
1st Post
mattbrain
UCM Pi Users


Joined: Tuesday Jun 12th, 2007
Location: United Kingdom
Posts: 185
Status: 
Offline

  back to top

To get the community version of the system up and running, do the following:
1. Make sure you have all the equipment listed in the Requirements topic
2. Download the latest release from the Releases topic
3.Create an SD card by unzipping the download and writing it to an SD card; detailed instructions can be found here (WindowsMac OSXLinux) - instructions courtesy of the Raspberry Pi Foundation.
4. Insert the SD Card into the Raspberry Pi, plug it in to the network and power and wait 2 minutes for it to boot.
5. Using a web-browser on your PC, navigate to http://alpha-uhai.local
You should now be able continue the installation following the instructions shown by clicking the instructions button.

If the browser is unable to find the Raspberry Pi, it is likely because your PC doesn't support mDNS. You may also be able to navigate to the Raspberry Pi directly by getting it's IP address from your routers DHCP client list, e.g. http://192.168.1.20




 Current time is 09:43 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems