Comfort Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Products > GSM Module > UCM/GSM Firmware > UCM/GSM4 7.097 - 7.100

UCM/GSM4 7.097 - 7.100
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Thursday Dec 29th, 2016 06:38 pm
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5742
Status: 
Online

  back to top

UCM/GSM4 Firmware 7.097 supports the new UCM/GSM4(3G) which runs on the 3G network isntead of the 2G GSM network. More details to e revealed soon on this new product

A new field in GSM Properties shows the GSM Module Type which is the GSM Module installed in the UCM/GSM4


 Posted: Friday Mar 10th, 2017 02:03 pm
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5742
Status: 
Online

  back to top

UCM/GSM firmware 7.100

This fixes a problem in older versions where if the U2 EEPROM on the UCM baseboard is missing or has insufficent capacity, the UCM resets instead of displaying "EEPROM Error"

With this firmware, the UCM/GSM status on the bottom left will display "EEPROM Error" if the EEPROM is missing or incorrect

This is important where the GSM4 submodule is changed in order to support the 3G network. the 2G GSM network is being phased out in several countries


 Current time is 08:23 am
Comfort Automation/ Security System Forums > Products > GSM Module > UCM/GSM Firmware > UCM/GSM4 7.097 - 7.100
 Top

UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems